Owner’s Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- PRODUCT OVERVIEW
- INSTALLATION
- OPERATION
- Control Panel
- Changing Oven Settings
- Gas Surface Burners
- Oven
- Before Using the Oven
- Oven Vent
- Using Oven Racks
- Instaview
- Bake
- Convection Mode (Lower Oven Only)
- Meat Probe
- Recommended Baking and Roasting Guide
- Proof (Lower Oven Only)
- Warm
- Broil (Upper Oven Only)
- Recommended Broiling Guide
- Frozen Meal (Lower Oven Only)
- Air Sous-Vide (Lower Oven Only)
- Recommended Air Sous-Vide Guide
- Air Fry (Lower Oven Only)
- Recommended Air Frying Guide
- Remote Start
- Using the Sabbath Mode
- SMART FUNCTIONS
- LG ThinQ Application
- Smart DiagnosisTM Feature
- MAINTENANCE
- TROUBLESHOOTING
- LIMITED WARRANTY
25OPERATION
ENGLISH
Calibrating the Oven Temperature
When you start using the oven, pay careful
attention to the recommended temperatures,
times, and rack positions in the manual. This oven
may differ from your previous oven, and it may
take some time to become accustomed to it. If you
have followed the recommended guides for this
oven and still believe that the temperature is
hotter or colder than expected, you can manually
calibrate the displayed oven temperature.
There are 2 methods for adjusting the
temperature display.
• Method 1: Try to gauge how much to increase or
decrease the displayed temperature by testing
familiar recipes at higher or lower temperatures
than recommended. This may help you decide
the amount of temperature adjustment you
want.
• Method 2: Adjust the temperature to 15 °F (8 °C)
hotter or cooler at first. Try the oven with this
setting. If you still need to adjust the oven
temperature, use the results of the first
adjustment as a reference and vary the
temperature adjustment amount until the oven
temperature display is calibrated to your
satisfaction.
1 Press and hold the Start Time button a for 3
seconds.
2 To adjust the lower oven, press the Start
Time button a repeatedly until L_AJ bshows
in the display.
To adjust the upper oven, press the Start
Time button a repeatedly until U_AJ bshows
in the display.
3 Use the number buttons c to enter the
number of degrees you want to adjust the
oven temperature. The temperature
adjustment is shown next to
U_AJ or L_AJ d.
You can adjust the temperature up or down
by 35 °F or 19 °C.
4 To lower the temperature, press Start Time
a to add a minus sign (-) to the displayed
number. To raise the temperature, press
Start Time a to remove the minus sign in the
display.
5 Press START e to accept the change.
NOTE
• This adjustment does not affect the broiling or
Self Clean temperatures. The adjustment is
retained in memory after a power failure. The
oven temperature can be adjusted by ±35 °F (±19
°C).
• Once the temperature is adjusted, press Start
Time repeatedly until
U_AJ or L_AJ is displayed
to see the amount you adjusted and change it if
needed.
• The temperatures displayed by an oven
thermometer placed in the oven cavity may
differ from the actual set oven temperature in all
modes.
Turning the Preheat Alarm Light On/
Off
When the oven reaches its set-temperature, the
preheating alarm light flashes 5 times or until the
oven door is opened.
You can activate or deactivate the preheating
alarm light.
1 Press and hold the Start Time button for 3
seconds. Press the Start Time button
repeatedly until
PrE appears in the display.
2 Press 1 repeatedly to select the light on/off.
3 Press START to accept the change.
Adjusting the Beeper Volume
1 Press and hold the Start Time button for 3
seconds. Press Start Time repeatedly until
8EEP appears in the display.
2 Press 1 repeatedly to select Hi, Lo or Off.
3 Press START to accept the change.