Owner’s Manual

19INSTALLATION
ENGLISH
1 Move the bottom hinge bracket to the left
side of the housing, keeping the same
orientation, and reattach with the two bolts
and one screw.
•Type A
•Type B
NOTE
• The flat screw must be placed on the exterior
side of the hinge.
• Disassemble the leveler before moving the
bottom hinge bracket.
2 To move the leveler a to the opposite side, lift
the front of the refrigerator. Remove the
leveler by turning it clockwise and attach it to
the opposite side by turning it
counterclockwise.
•Type A
•Type B
NOTE
• The leveler is only present on some models.
3 Move the decorative screws to the holes on
the bottom right side of the housing.
4 Turn the refrigerator door upside down on a
non-scratching surface.
5 Loosen the three screws to remove the
bracket
b and the hinge pin sleeve c .
6 Move the bracket to the opposite side of the
door and insert the hinge pin sleeve. Reverse
the hinge lever
d by flipping it over. Place it
on top of the bracket, and tighten both down
with the screw. Then insert the remaining 2
screws to tighten the bracket to the
refrigerator door.