Owner’s Manual

20
INSTALLATION
of the refrigerator. Use the three bolts to
attach the hinge.
4 Force-fit the top hinge cover over the top
hinge.
5 Insert the decorative cover on the top right of
the cabinet to cover the holes. Cover is force-
fitted.
NOTE
• After changing doors, make sure that the
corners of the door gaskets are not folded over.
To ensure a good seal, apply a small amount of
silicon grease on the corners
a of the gaskets.
Levelling the Appliance
Adjusting the Levelling Leg
If the appliance seems unsteady, or the doors do
not close easily, adjust the appliance’s tilt using the
instructions below.
1 Turn the levelling leg clockwise to raise that
side of the appliance or counterclockwise to
lower it.
2 Open the doors and check to make sure that
they close easily.
NOTE
• Leveling the doors may not be possible when the
floor is not leveled, or is of weak or poor
construction.
• The refrigerator is heavy and should be installed
on a rigid and solid surface.