Owner’s Manual

19
INSTALLATION
ENGLISH
9 Flip the middle hinge bracket g . (The flange h
will now be on top.) Position it on the left side
of the refrigerator and reattach it with two
bolts and a Phillips-head screw.
10 Place the refrigerator door down over the
bottom hinge pin on the bottom hinge bracket.
11 Place the washer i between the refrigerator
door and the middle hinge bracket and
reattach the middle hinge pin
j to the middle
hinge bracket with a 1/4 in. socket wrench.
NOTE
• The bracket has been flipped, but the middle
hinge pin stays in the same orientation with its
hexagonal end facing upward.
12 Insert the decorative screw into the outer hole
on the right side of the housing. Attach the
decorative cover on the right side. Cover is
force-fitted.
Assembling the Reversed Freezer
Door
1 Pry off the decorative cover on the top left side
of the refrigerator to uncover the screw holes.
2 Place the freezer door down over the middle
hinge pin on the middle hinge bracket.
3 Place the top hinge on top of the freezer door
and line up the top hinge with the holes on top