Owner’s Manual

17
INSTALLATION
ENGLISH
5 Reattach the bottom hinge pin to the opposite
side of the bottom hinge bracket.
6 Using a 3/8 in. socket wrench with a 2-inch
extension, loosen the 2 bolts on the bottom
hinge bracket. Use a Phillips screwdriver to
loosen the screw.
CAUTION
• Be careful that the refrigerator does not fall
forward if the model purchased has the leveler
attached to the bottom hinge bracket.
7 Remove the bottom hinge bracket from the
right side of the housing.
8 Remove the decorative screws on the bottom
left of the refrigerator housing and set them
aside. You will need these holes for the bottom
hinge bracket.
Assembling the Reversed
Refrigerator Door
1 Move the bottom hinge bracket to the left side
of the housing, keeping the same orientation,
and reattach with the two bolts and one screw.
NOTE
• The flat screw must be placed on the exterior
side of the hinge.
2 To move the leveler a to the opposite side, lift
the front of the refrigerator. Remove the
leveler by turning it clockwise and attach it to