Owner’s Manual

15
INSTALLATION
ENGLISH
WARNING
• Use two or more people to remove and install
the refrigerator doors.
• Disconnect the electrical supply to the
refrigerator before installing.
CAUTION
• Be careful when handling the hinge and hinge
lever.
• Remove food and bins before detaching the
doors.
• Do not hold the handle when removing or
replacing the doors as the handle may come off.
•
Tools Needed
- Flat-head screwdriver
- Phillips screwdriver
- 1/4 in. Hex socket wrench
- 3/8 in. Hex socket wrench
Removing the Freezer Door
1 Gently pry off the top hinge cover a with a flat-
head screwdriver and remove it.
2 Using 10 mm or 3/8 inch socket wrench,
remove the three bolts and lift off the top hinge
b . Set parts aside.
3 Lift freezer door slightly and remove it.
4 Turn the freezer door upside down on a non-
scratching surface. Loosen the screw to
remove the hinge lever and hinge pin sleeve.
5 Move the middle hinge bracket to the other
side of the door, keeping the same orientation.
6 Move the hinge pin sleeve c into the hole on
the left side of the bracket
d .