Owner’s Manual

Table Of Contents

INSTALLATION

Before Installation

Dimensions and Clearances

• Check the dimensions of the appliance and the installation path to ensure there is sufficient room to

move the refrigerator through doors or narrow openings.

• If an opening is too narrow to fit the refrigerator through, remove the refrigerator doors. See Removing/

Assembling Doors and Crispers in this manual.

• The installation location chosen for the refrigerator should allow space behind the unit for connections

and airflow and space in front to open the doors and drawers.

• Too small of a distance from adjacent items may result in lowered freezing capability and increased

electricity consumption charges. Allow at least 2 inches (50 mm) between the back of the refrigerator

and the wall.

• Remember to allow enough room in front of the refrigerator to fully open the doors.

- Dimensions/Clearances 20 cu. ft. model

A Depth without Handle 33 3/4" (856 mm)

B Width 30" (760 mm)

C Height to Top of Case 65 1/2" (1 660 mm)

D Height to Top of Hinge 66" (1 676 mm)

E Back Clearance 2" (50 mm)

F Depth without Door 29 1/2" (748 mm)

G Depth (Total with Door Open 90°) 60 1/4" (1 530 mm)