Owner’s Manual

12 INSTALLATION
Dimensions and Clearances
• Check the dimensions of the appliance and the installation path to ensure there is sufficient room to
move the refrigerator through doors or narrow openings.
• If an opening is too narrow to fit the refrigerator through, remove the refrigerator doors. See Removing/
Assembling Doors and Drawers in this manual.
• The installation location chosen for the refrigerator should allow space behind the unit for connections
and airflow and space in front to open the doors and drawers.
• Too small of a distance from adjacent items may result in lowered freezing capability and increased
electricity consumption charges. Allow at least 2 inches (50 mm) between the back of the refrigerator
and the wall.
• Remember to allow enough room in front of the refrigerator to fully open the doors.
Removing/Assembling
Doors
The method for removing/assembling the door
may differ depending on the model.
If the entrance door is too narrow for the
refrigerator to pass through, remove the
refrigerator doors and move the refrigerator
sideways through the doorway.
WARNING
• Use two or more people to remove and install
the refrigerator doors.
• Disconnect the electrical supply to the
refrigerator before installing.
• Do not put hands, feet or other objects into the
air vents or bottom of the refrigerator.
• Be careful when handling the hinge and hinge
lever.
• Remove food and bins before detaching the
doors.
• Do not hold the handle when removing or
replacing the doors as the handle may come off.
- Dimensions/Clearances 20 cu. ft. model 24 cu. ft. model
A Depth without Handle 33 3/4'' (856 mm) 33 3/4'' (856 mm)
B Width 29 7/8'' (760 mm) 32 7/8'' (836 mm)
C Height to Top of Case 65 3/8'' (1660 mm) 68 (1726 mm)
D Height to Top of Hinge 66'' (1676 mm) 68 3/8'' (1736 mm)
E Back Clearance 2'' (50.8 mm) 2'' (50.8 mm)
F Depth without Door 29 1/2'' (748 mm) 29 1/2'' (748 mm)
G Depth (Total with Door Open
90°)
60 1/4'' (1530 mm) 63 1/4'' (1605 mm)
A
F
E
B
C
D
G