Owner’s Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- PRODUCT OVERVIEW
- INSTALLATION
- OPERATION
- SMART FUNCTIONS
- MAINTENANCE
- TROUBLESHOOTING
- LIMITED WARRANTY
14 INSTALLATION
• Tools Needed
- Flat-head screwdriver
- Phillips screwdriver
- Adjustable wrench
- 1/4 in. Hex socket wrench
- 3/8 in. Hex socket wrench
- 10 mm Hex socket wrench
- 1/4 in. Hex Key Wrench
Removing the Freezer Door
1 Gently pry off the top hinge cover a with a
flat-head screwdriver and remove it.
2 Using 10 mm or 3/8 inch socket wrench,
remove the three bolts and lift the top hinge
b. Set parts aside.
3 Lift freezer door slightly and remove it.
Assembling the Freezer Door
1 Set the freezer door onto the middle hinge
pin.
2 Place the top hinge on top of the freezer door
and line up the hinge with the holes on top of
the refrigerator. Use the three bolts to fasten
the hinge.
3 Carefully snap the top hinge cover back into
place over the hinge.
Removing the Refrigerator Door
1 Loosen and remove the two bolts a and the
screw b from the middle hinge bracket c
and remove it from the refrigerator housing.
Set parts aside.