Use and Care Guide

60
WARRANTY
Problem Cause Prevention
•
Knobs melt Improper usage
•
Do not leave door at stop
position during Broil/Bake
mode or right after cooking.
•
Oven or racks are
stained after using
aluminum foil
Aluminum foil has melted in the oven
•
Never cover the oven bottom
or cover an entire rack with
materials such as aluminum
foil.
•
If the foil has already melted
onto the oven, it will not
affect the performance of the
oven.
•
Flame or power is
weak
Gas pressure may be weak
•
Check with gas supplier first
•
Surface is not level
•
Oven is tipping
1. Range not leveled
2. Anti-tip device not installed correctly
•
Check with installer first
Anti-tip bracket
Approximately
0.65"
(16.5 mm)
Level both sides of range
Screw must
enter wood or
concrete
Wall plate
1
2
Use carpenter’s level to
check level.
•
Oven shows error
code (F9, F19) but
cooktop burners are
working.
The gas pressure regulator valve is closed.
•
Check that the regulator
valve is in the open position.
•
If the regulator valve is
closed, rotate the lever to
open the valve.
Lever’s closed position
Lever’s open
position
Lever’s closed
position