Owner’s Manual

25OPERATION
ENGLISH
a Burner On
The Burner On indicator light turns on when the knob is turned even if the cooktop element does not
operate.
b Hot surface indicator
The hot surface indicator light glows as long as any surface cooking area is too hot to touch.
It remains on after the element is turned off and until the surface has cooled to approximately 150 ˚F.
c Dual
d Single
e Mode
Changing Oven Settings
Clock
The clock must be set to the correct time of day in
order for the automatic oven timing functions to
work properly.
Model LSEL6333*, LSEL633CF
1 Set the oven mode knob to the Off position.
2 Press Cook Time for 3 seconds. CLO shows in
the display.
3 Press plus(+) or minus(-) to select the desired
time.
4 Press START.
Model LSEL6331*
1 Press Clock
2 Press plus(+) or minus(-) to select the desired
time.
3 Press START.
NOTE
• The time of day cannot be changed during a
timed baking or self-clean cycle.
• If no other keys are pressed within 25 seconds of
pressing Clock, the display reverts to the
original setting.
• If the display time is blinking, there may have
been a power failure. Reset the time.
Oven Light
The interior oven light automatically turns on
when the door is opened.
•Press Light to manually turn the oven light on.
NOTE
• The oven light cannot be turned on if the Self
Clean function is active.
• The oven light turns off automatically after 90
seconds.
Timer On/Off
The Timer serves as an extra timer in the kitchen
that beeps when the set time has run out. It does
not start or stop cooking.
Icon Type1 Icon Type2
Icon Type1 Icon Type2