Installation Guide

12 INSTALLATION
NOTE
flammable fluids, or abrasive cleaners to remove
tape or glue. These products can damage the
surface of your range.
n be installed on soft
floor coverings such as cushioned vinyl or
carpeting. Use care when moving the range on
this type of flooring. Use a belt when moving the
range to prevent damaging the floor. Or slide
the range onto cardboard or plywood to avoid
damaging the floor covering.
Choosing the Proper
Location
Electricity
The range should always be plugged into its own
individual properly grounded electrical outlet.
which could cause a fire hazard from overheated
wires.
serving only this appliance be provided.
Flooring
CAUTION
under the range if installing the range over
carpeting.
Ambient Temperature
CAUTION
cabinets around the range can withstand the
heat (up to 194 °F) generated by the range.
Discoloration, delamination or melting may
occur. This range has been designed to comply
with the maximum allowable wood cabinet
temperature of 194 °F.
with linoleum or other synthetic floor covering,
make sure the floor covering can withstand
temperatures of at least 200 °F (93 °C).