Owner’s Manual

28 OPERATION
• Press and hold Extra Dry for three seconds to
activate.
•The Night Dry option is selected by default for
all cycles for which it is available, except the
Normal cycle.
• To add the Night Dry option to the Normal
cycle, press and hold Extra Dry for 3 seconds.
Delay Start
This feature delays the start of a selected cycle.
Each time the Delay Start button is pressed, the
delay time increases by an hour. The delay time
can be set from 1 to 12 hours, in one-hour
increments.
Cycle/Option Guide
The cycle guide below shows the available options for each cycle.
* Extra drying time only, no added high-temperature rinse
** Default setting
NOTE
• Actual water consumption will vary depending on soil level and hardness of water.
• The actual running time and cycle time displayed may change depending on options chosen, soil level,
water temperature, and hardness of water. Therefore, display time and actual running time can be
different.
• Energy Saver cannot be used at the same time as Extra Dry or High Temp..
• Options are not available for Download Cycle.
Cycle Auto Heavy Delicate Refresh Normal
Soil Level All levels Heavy Light Light All levels
Water Usage
(L)
13.8 -
24.5
26.9 -
32.0
19.7 -
24.8
7.8
9.2 -
25.9
(gal)
3.6 -
6.5
7.1 -
8.4
5.2 -
6.6
2.1
2.4 -
6.8
Wash Time with
Options (Mins.)
90 -
227
141 -
226
97 -
150
59 -
79
99 -
216
Available
Options
Dual Zone
## #
Half Load
### #
Energy
Saver
###
High Temp.
## #
Steam
##** #** #** #
Extra Dry
###* #* #
Night Dry
#** #** #** #** #
Delay Start
#####
Cycle Turbo Express Rinse
Machine
Clean
Soil Level Heavy Light Light
us_main.book.book Page 28 Thursday, April 21, 2022 1:45 PM