Owners Manual
ENGLISH
FAQS
27
How long does the clean indicator stay lit after the
cycle is complete?
The clean light indicator on the dishwasher will stay lit for 4 min-
utes before turning o. You can, however, program the dishwash-
er so that the clean light stays on until the dishwasher door opens.
Why does my dishwasher continuously beep if
I open the door during a cycle or right after the
cycle has nished?
This is normal. The dishwasher is letting you know that the interior
temperatures of the unit are hot and to use caution when placing
your hands inside. Once the unit has cooled down, the beeping
will stop.
PRODUCT FEATURES AND
OPERATION
What is the benet of steam?
Steam allows for thorough cleaning of baked on foods while us-
ing less water than other power scrub methods. Steam also allows
for enhanced cleaning performance when cleaning ne china and
stemware items on a delicate cycle. Stream particles are smaller
and more active so their penetrating power is more eective.
Steam also increases the interior temperature of the dishwasher,
which helps in melting oily or waxy substances, like lipstick along
the rim of a glass.
What is Child Lock and how is it activated?
Child Lock is a feature that will prevent the controls from being
changed during the cycle. It does not prevent the door from be-
ing opened or the unit from being powered o. To activate or de-
activate, press the Spray and Rinse buttons (LDS6040 : Half Load
and Delay Start) simultaneously for 3 seconds.
Why is “PF” showing up on the display?
PF is not an error code indicating a malfunction. PF indicates that
there was a power failure. This function protects the dishwasher
in the event that the power goes out or the power to the unit is
disrupted. When power is returned and a button is pushed, this
will display for 10 seconds and then go away.
INSTALLATION
What size is the 90° elbow?
The 90° elbow should have a 3/8” NPT on the end that connects
to the dishwasher.
Can I add an extension to the drain hose?
No, an extension cannot be added.