Owner’s Manual
Always remove the cutlery from the rack before removing
the rack.
NOTE
Pull the rack out to the end of the rails. Then, lift the front of the
rack so that the rollers clear the stop on the end of the rail. The
rack can now be slid forward and removed from the rails.
WARNING
Be careful when loading and unloading sharp edged items. Load
sharp knives with the blade down to reduce the risk of injury.
18
OPERATING INSTRUCTIONS
LOADING THE CUTLERY RACK HEIGHT ADJUSTABLE TRAY
Each side tray can be adjusted independently to a high or low
position to accommodate dierent sizes of utensils or cutlery.
Remove dishes before adjusting the tray.
The cutlery rack is best suited for atware and most cooking or
serving utensils. Heavily soiled utensils or items with baked on
foods should be placed in the middle rack or spoon basket for
best performance. The separators on the cutlery racks help keep
atware separated to avoid damage and improve cleaning.
Sample 10-place setting.
Right Wrong
Alternate
If the handles of your atware
are too thick, then reverse the
pieces so that the handles face
the other direction, as shown
in the bottom gure.
Each tray is adjusted by lifting it out and rotating it front to back.
Removing the Cutlery Rack
The entire cutlery rack can be removed if more space is needed on
the upper rack for larger items.
①
①
③
③
④
④
⑤
⑤
②
②