Measure First Guide

CLEAR THE WAY
GET IT INSTALLED
If your purchase includes installation, your LG washer and dryer will be unboxed, put in place, connected to the appropriate
sources and leveled. Then they’ll be tested to make sure that everything works correctly. All packing material will be removed
and your home restored to its original condition.
FOR WASHER: FOR GAS DRYER: FOR ELECTRIC DRYER:
110V grounded 3-prong
electrical outlet within 6 feet
Water supply (hot and cold)
Drain must be no higher than
96 inches and within 5 feet of
the washer
A clean, solid and level floor
surface
New electrical cord
(3- or 4-prong depending
on your outlet, sold separately)
240V electrical outlet
UL approved rigid or
semi-rigid dryer venting
(never use foil or plastic)
New gas flex connection kit
(sold separately) and natural
gas line connection
LP conversion kit (if not using
natural gas, sold separately)
110V grounded 3-prong
electrical outlet within 4 feet
UL approved rigid or
semi-rigid dryer venting
(never use foil or plastic)
• Ifadoorwayistoonarrowor
the door cannot be opened fully,
remove the door. If the hinges are
fixed pin hinges, they will need to
be unscrewed to remove the door.
• Fornarrowstairswithhandrails,
removing the railing may help you
meet the minimum 30" clearance.
• Ifthelaundryroomisn’tdeep
enough for the appliances plus
the dryer duct, you may be able
to use special venting components,
such as a side vent kit, to reduce
venting requirements. See
associate for details.
Note: Accessories, stacking kits and pedestals are sold separately.
To ensure your installation goes smoothly, here are some final items you’ll need to have in place:
Prepare for a smooth delivery
by dealing with potential
obstacles now. Here are
some helpful hints to try:
Remember, if ANY part of the delivery path or final installation location is too small to fit this LG washer and dryer,
and the obstructions can’t be moved, you’ll need to notify your retailer BEFORE your scheduled delivery date!