Specification
© 2024 LG Electronics USA, Inc. All rights reserved. “LG Life’s Good” is a registered trademark of LG Corp. All other product and brand names
are trademarks or registered trademarks of their respective owners. Design, features and specications are subject to change without notice.
Non-metric weights and measurements are approximate. Some features may require Internet access. Content and services may vary by product
and are subject to change without notice.
2 of 2
F
E
I
F
I
G
B
A
10/22
DIMENSIONS / CLEARANCES
LSCE365ST
30” Min.
(762 mm)
** Do not obstruct these areas!
4" X 8" (102 mm x 203 mm)
opening to route armored
cable if panel is present.
Recommend space cooktop and oven
Overhead cabinet should not exceed a maximum
depth of 13” (330 mm).
3 3/4” (95 mm)
min. from
edge of cooktop
to nearest
combustible wall
(either side of unit).
2 1/2”
(64 mm)
Empty space is needed underneath
the cooktop for installation purposes.
Approximate location of junction box.
12”
(305 mm)
10”
(254 mm)
18”
(457 mm)
36” Min
(914 mm)
24”
(610 mm)
Min. recommended
distance between
rear edge of cutout
and nearest
combustible
surface.
2 3/4” (70 mm)
DIMENSIONS / CLEARANCES
A 36
1111
/
1616
" (932 mm)
B 22
1515
/
3232
" (571 mm)
C 3
33
/
44
" (95 mm)
D 33
2727
/
3232
" (860 mm)
E 19
2525
/
3232
" (502 mm)
F 34
99
/
1616
" Minimum (878 mm)
G 20
33
/
88
" Minimum (517 mm)
H
1313
/
1616
" (20 mm)
I 13" Maximum (330 mm)
J 5
2323
/
3232
" Minimum (145 mm)
K 2
11
/
22
" (64 mm)
L 24" (610 mm)
INSTALLATION NOTES
• Allow 2" (50 mm) space below the
armored cable opening to clear the
electric cable and allow space for
installation of the junction box on
the wall at the back of the cooktop.
• Make sure the cabinets and wall
coverings around the cooktop can
withstand the temperatures up to
200˚F generated by the cooktop.
• To eliminate the risk of burns or re
by reaching over heated surfaces,
cabinet storage space located above
the cooktop should be avoided. If
cabinet storage is provided, risk can
be reduced by installing a range hood
that projects horizontally a minimum
of 5" (127 mm) beyond the face of
the cabinets.
• It is very important to keep 2
33
/
44
"
(70 mm) distance between the
cooktop and the oven.