Owner's Manual

Press F10 to save the new
settings.
If
the
following message
appears,
select Yes and
press
Enter to restart the
computer.
Setting
a user
password
A
user
password
is a
secondary compared
to a
supervisor password.
You must
set a
supervisor password
in
order to set a
power-on password.
Start the BIOS
Setup Utility
and use arrow
keys
to select
Security
menu.
Use arrow
keys
to select Set User Password and
press
Enter.
Note:
A
power-on password
gives
limited access for
changing
the
settings
in
the
BIOS
Setup Utility compared
to a
supervisor password.
If
the
following message
appears,
enter a new
password
and then
press
Enter.
A
password
must be consisted of character
A~Z
and numbers
0~9,
and have the
maximum
length
of 8.
-86-