OWNER'S MANUAL • Please read carefully and thoroughly this manual before operating this unit. • Contact the authorized SVC man for repair or maintenance of this unit. • Contact the installer for installation of this unit. • The appliance is not intended for use by young children or infirm persons without supervision. • Young children should be supervised to ensure that they do not play with the appliance.
Safety Precautions Safety precautions Safety Precautions Warning ................................2 Caution .................................3 Operating Instructions Preparation before operation ..4 Remote Control Features .....5 Operation Mode Selection ......7 Troubleshooting Tips Care and Maintenance Operating Instructions Additional features..............13 To prevent injury to the user or other people and property damage, the following instructions must be followed.
• Contact the authorized Service technician for repair or maintenance of this unit. • Contact the installer for installation of this unit. • The air conditioner is not intended for use by young children or infirm persons without supervision. • Young children should be supervised to ensure that they do not play with the air conditioner. CAUTION CAUTION When the air filter is to be removed, do not touch the metal parts of the indoor unit. • It may cause an injury.
Safety Precautions Operating Instructions Care and Maintenance Troubleshooting Tips Preparation before operation How to Insert the Batteries Remove the battery cover by pulling it according to the arrow direction. Insert new batteries making sure that the (+) and (-) of battery are installed correctly. Reattach the cover by sliding it back into position. NOTES: • Use 2 AAA(1.5volt) batteries. Do not use rechargeable batteries.
The remote control transmits the signals to the system.
Cooling Operation Troubleshooting Tips Care and Maintenance Operating Instructions Safety Precautions How to use the Operation Mode Selection button 1 Press the Start/Stop button. The unit will respond with a beep. 2 Open the door on the remote control. To select Cooling Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow.
SafetyENGLISH Precautions Auto Operation Press the Start/Stop button. The unit will respond with a beep. 2 Open the door on the remote control. To select Auto Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow. Cooling 3 Healthy Dehumidification Heating (Heat pump model only) The temperature and fan speed are automatically set by the electronic controls based on the actual room temperature.
Safety Precautions Troubleshooting Tips Care and Maintenance Operating Instructions Healthy Dehumidification Operation 1 Press the Start/Stop button. The unit will respond with a beep. 2 Open the door on the remote control. To select Healthy Dehumidification Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow.
SafetyENGLISH Precautions Heating Operation(Heat pump model only) Press the Start/Stop button. The unit will respond with a beep. 2 Open the door on the remote control. To select Heating Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow. Cooling Healthy Dehumidification Heating (Heat pump model only) Close the door on the remote control. Set the temperature higher than the room temperature.
Safety Precautions Troubleshooting Tips Care and Maintenance Operating Instructions Jet Cool Operation 1 Press the Start/Stop button. The unit will respond with a beep. 2 Press the Jet Cool button to operate the speed cooling mode and the unit will operate in super high fan speed on cooling mode for 30 minutes. 3 To cancel the Jet Cool mode, press the Jet Cool button or the fan speed button or the room temperature setting button again and the unit will operate in high fan speed on cooling mode.
2 Open the door on the remote control. Press the PLASMA air purifying operation ON/OFF button. Operation will start when the button is pressed and stop when the button is pressed again. 3 Set the fan speed again with door of the remote control closed. You can select the fan speed in four steps-low, medium, high or CHAOS. Each time the button is pressed, the fan speed mode is shifted. ✴ Air purifying operation (PLASMA) can be with cooling, Heating or any other operations.
Safety Precautions Operating Instructions 2nd F Operation 1 Press the Start/Stop button. The unit will respond with a beep. 2 Open the door of the remote control and press the 2nd Function button to operate functions printed in blue at bottom of buttons. (Check the indication of 2nd function on remote control display.
Sleep Mode 1 2 The Timer is programmed in one-hour increments by pressing the Sleep Mode Auto button 1 to 7 times. The sleep mode is available for 1 to 7 times. To alter the time period in steps of 1 hour, press the Sleep Mode Button while aiming at air conditioner. Note: The Sleep Mode will be operated at slow fan speed (cooling) or medium fan speed (heat pump only) for quiet sleeping.
Safety Precautions 2) When second reservation 1 Make sure the time is set correctly on the remote control display. 2 Press 2nd F button. 3 Press the ON/OFF Timer button two times to turn Timer on or off. (LCD "2" blink) ON OFF 4 Press the Time Setting buttons until the desired time is set. 5 To set the selected time, press the Timer SET button while aiming the remote control at the signalreceptor.
The up/down airflow (Vertical Airflow) can be adjusted by using the remote control. 1 Press the Start/Stop button to start the unit. 2 Open the door on the remote control. Press Chaos Swing button and the louvers will swing up and down. Press the Chaos Swing button again to set the vertical louver at the desired airflow direction.
Safety Precautions Operating Instructions Care and Maintenance Troubleshooting Tips The Button Operation FORCED OPERATION The operation will be started if the power button is pressed. If you want to stop operation, re-press the button. FORCED OPERATION Cooling Model Operating mode Indoor FAN Speed Setting Temperature Cooling High 22°C Room Temp. ≥ 24°C Cooling High 22°C Heat pump Model 21°C ≤ Room Temp. < 24°C Healthy Dehumidification Healthy Dehumidification Rule Room Temp.
Care and maintenance of the air conditioner CAUTION: Before performing any maintenance, turn off the main power to the system. Grille, Case, and Remote Control ❏ Turn the system off before cleaning. To clean, wipe with a soft, dry cloth. Do not use bleach or abrasives. NOTE: Supply power must be disconnected before cleaning the indoor unit. ❏ Never use any of the followings: • Water hotter than 40°C Could cause deformation and/or discoloration.
Safety Precautions Operating Instructions Care and Maintenance Troubleshooting Tips Replacement of Purifying Filter(Option) • Recomended use period : About 2 years 1 Open front panel and remove air 2 Remove air purifying filters. filters. 3 Insert new air purifying filters. Air filter 2 3 4 Reinsert air filters and close front panel. Air purifying filter Outdoor Unit (Side) The heat exchanger coils and panel vents of the outdoor unit should be checked regularly.
When air conditioner is not going to be used for a long time. When the air conditioner is to be used again. Clean the air filter and install it in the indoor unit. (Refer to page 17 for cleaning filters.) Operate the air conditioner on Air circulation mode (Refer to page 15) for 2 to 3 hours. • This will dry out the internal mechanisms. Turn off the circuit breaker, and disconnect the plug. Check that the air inlet and outlet of the indoor/outdoor unit are not blocked.
Troubleshooting Tips Care and Maintenance Operating Instructions Safety Precautions Before you call for service... ? Troubleshooting Tips! Save time and money! Check the following points before requesting repairs or service.... If the fault persists, please contact your dealer or service center. Case Explanation See page The air conditioner does not operate.
Memo 21
Memo 22
P/No.
