Use and Care Manual

THIS REFRIGERATOR IS MANUFACTURED WITH GREAT CARE AND UTILIZES THE
LATEST IN TECHNOLOGY.
WE ARE CONFIDENT THAT YOU WILL BE FULLY SATISFIED WITH ITS PERFORMANCE
AND RELIABILITY.
BEFORE USING YOUR REFRIGERATOR, PLEASE READ THIS
IT PROVIDES EXACT INSTRUCTIONS FOR INSTALLATION, OPERATION,
AND MAINTENANCE, AND ALSO SUPPLIES SOME USEFUL HINTS.
INSTALLATION
1. Select a good location.
Place your refrigerator where it is easy to
use.
2. Avoid placing the unit near heat sources,
direct sunlight or moisture.
3.
If required, adjust the leveling screws to
compensate for unevenness of the floor.
The front should be slightly higher than the
rear to aid in door closing.
Leveling screws can be turned easily by
tipping the cabinet slightly.
Turn the leveling screws clockwise( ) to
raise the unit, counterclockwise( ) to
lower it
NEXT
1. Clean your refrigerator thoroughly and wipe
off all dust accumulated during shipping.
3.
4.
Connect the power supply cord (or plug) to
the outlet. Don't double up with other
appliances on the same outlet.
Prior to storing food, leave your refrigerator
on for 2 or 3 hours.
4.
To avoid vibration, the unit must be level
.
MANUAL CAREFULLY.
To ensure proper air circulation around the
refrigerator, maintain sufcient space on
both the sides as well as top and maintain
(if stand base is not used).
5.Don't install this appliance in areas where
the temperature gets below 55 °F (13 °C).
Doing so may cause a loss in cooling
performance.
2. Install accessories such as shelves, bins, and
ice cube tray in their proper places. They are
packed together to prevent possible damage
during shipment.
at least 2 inches (50 mm) from the rear wall.
8