Owner's Manual

16 INSTALLATION
4 Lift the door from the middle hinge pin and
remove the door.
CAUTION
• Place the door, inside facing up, on a
nonscratching surface.
Removing the Right Refrigerator
Door
1 Detach all the wire harnesses a. Unscrew the
ground wire b.
NOTE
• The number of wire harnesses may vary
depending on the model.
• Ground wire is only available on some models.
2 Rotate the hinge lever c clockwise. Lift the
top hinge d free of the hinge lever latch e.
CAUTION
• When lifting the hinge free of the latch, be
careful that the door does not fall forward.
3 Lift the door from the middle hinge pin and
remove the door.
CAUTION
• Place the door, inside facing up, on a
nonscratching surface.
Assembling the Right Refrigerator
Door
CAUTION
• Install the right-side door first.
1 Make sure that the plastic sleeve is inserted in
the bottom of the door. Lower the door onto
the middle hinge pin as shown in the figure.
2 Fit the hinge a over the hinge lever latch b
and slot it into place. Rotate the lever c
counterclockwise to secure the hinge.
us_main.book.book Page 16 Friday, February 7, 2020 11:44 AM