Owner’s Manual

16 INSTALLATION
2 Grasp the drawer on each side and hook the
drawer supports into the rail tabs located on
both sides.
CAUTION
Do not hold the handle when removing or
replacing the drawer. The handle may come off,
causing personal injury.
3 Lower the door into its final position and
insert the screws in the rails on both sides.
4 Insert the Durabase basket in the rail
assembly.
5 Insert the drawer into the frame, and push
the drawer back until it clicks into place.
Replace the ice bin in the drawer.
Assembling the Refrigerator Door
1 Make sure that the hinge pin sleeve is
inserted in the bottom of the door. Lower the
door onto the middle hinge pin.
2 Align the door with the cabinet.
3 Fit the hinge a over the hinge lever latch b
and slot it into place. Rotate the lever
c
counterclockwise to secure the hinge.
4 Replace the hinge cover d. Insert and tighten
the cover screws
e.
us_main.book.book Page 16 Monday, March 2, 2020 3:48 PM