Owner’s Manual

14 INSTALLATION
fasteners and tightening the set screws b
with a 1/8 in. Allen wrench.
Removing/Assembling
Doors and Drawers
If the entrance door is too narrow for the
refrigerator to pass through, remove the
refrigerator doors and move the refrigerator
sideways through the doorway.
WARNING
• Use two or more people to remove and install
the refrigerator doors and freezer drawer.
• Disconnect the electrical supply to the
refrigerator before installing.
• Do not put hands, feet or other objects into the
air vents or bottom of the refrigerator.
• Be careful when handling the hinge and hinge
lever.
• Remove food and bins before detaching the
doors and drawer.
• Do not hold the handle when removing or
replacing the doors and drawer as the handle
may come off.
• Tools Needed
- Phillips screwdriver
- Flat-head screwdriver
Removing the Refrigerator Door
1 Remove the top hinge cover screws a. Lift the
hook (not visible), located at the bottom of the
cover
b with a flat-head screwdriver.
2 Rotate the hinge lever c clockwise. Lift the
top hinge d free of the hinge lever latch e.
CAUTION
• When lifting the hinge, be careful that the door
does not fall forward.
3 Lift the door from the middle hinge pin and
remove the door.
CAUTION
• Place the door, inside facing up, on a non-
scratching surface.
Removing Freezer Drawers
WARNING
• To prevent accidents, keep children and pets
away from the drawer. Do not leave the drawer
open. If the Durabase storage bin is removed
us_main.book.book Page 14 Monday, March 2, 2020 3:48 PM