Owner's Manual

Recording
10
Basic Recording
11
Select a function you wish to record by setting
FUNCTION SWITCH except TAPE function.
22
Insert a blank tape.
33
Press RECORD (
z
) button.
TAPE PLAY (
b
) button is pressed
automatically.
44
Start playing your CD or RADIO.
CD Synchronized Recording
This feature automatically records an entire CD into a
cassette.
11
Load a CD disc and Set FUNCTION SWITCH to
CD.
22
Insert a blank tape.
33
Press RECORD (
z
) button.
TAPE PLAY (
b
) button is pressed
automatically.
44
The synchronized recording is started
automatically after about 7 seconds.
To pause recording
Press TAPE PAUSE (
X
) button. Press TAPE PAUSE
(
X
) button again to resume recording.
To stop recording
Press TAPE STOP/EJECT (
xZ
) button.
(Your cassette deck will automatically stop at the end of
the tape.)
Notes
• If you wish to record from the desired track, select the
desired track with
CD SKIP/SEARCH (
.
,
>
)
button before commencing CD recording.
• If bear noises sound when AM broadcast recording,
reset RIF on the rear panel.
Wind the tape to the point recording starts. (Use only normal tapes.)
• TAPE PAUSE (
X
)
• T
APE STOP/EJECT (
xZ
)
• FAST FORWARD (
m
)
• REWIND (
M
)
• TAPE PLAY (
b
)
• TAPE RECORD (
z
)
• CD BACKWARD SKIP/SEARCH (
.
)
• CD FORWARD SKIP/SEARCH (
>
)
• CD REPEAT
• CD STOP (
x
)
• CD PLAY/PAUSE (
u
)