OWNER’S MANUAL Network Camera Please read this manual carefully before operating your set and retain it for future reference. MODELS LNB7210 LNB5110 LND5110 LNV7210 LND7210 LNV5110R LND5110R LNU5110R LNV7210R LND7210R LNU7210R LNV7210RH LNU7210RH 1504 (V1.
Contents Introduction.................................................................................... 3 Features Chart.........................................................................................3 Operation and settings.................................................................. 4 Before using the system......................................................................4 Recommended PC Requirements....................................................4 Accessing the LG IP device......
Introduction The LG Network Camera is designed to use on an Ethernet network and must be assigned an IP address to make it accessible. This manual contains instructions on how to install and manage the LG Network Camera in your networking environment. Some knowledge of networking environments would be beneficial to the reader. Note that design and specification of this unit may change from the manual as quality and improvement without prior notice.
Operation and settings Before using the system Recommended PC Requirements • Before using the LG IP device make sure the connections are correct and verify whether proper power supply is used. The LG IP device can be used with most standard operating systems and browsers. • Check the connections of the LG IP device for the correct conditions. • Check that the LG IP device is(are) connected to the network and that power is supplied.
Accessing the LG IP device You can access the LG IP device by following the below steps. 1. 3. Logging in to the LG Smart Web Viewer 3.1 Run the IP Utility and find the LG IP devices. 3.2 When the LG IP devices appear in the IP Utility window, double-click IP address or right click on the same IP address and select “Connect to Web Page” to start the LG Smart Web Viewer. When accessing the LG Smart Web Viewer, the window for login will be shown.
LG Smart Web Viewer Overview Click to effect and then check the check box of [Edge Enhancement] option. The user gets more sharp reception on the live view window. Note: This feature only affects the live view window. Click to save the current image in JPEG format on your computer. 1. Click the [Snapshot] button and then the Snapshot window is displayed. 2. Click the [Save] button in the Snapshot window. Item Description Select the video image size from the drop-down list.
Click this button and drag the area to use Digital PTZ function. Right-clicking the screen will bring up the previous magnification. (Color icon: On, Gray scale icon: Off.) 1. Click this button to open the folder browse window. Click the button again in next time, video is recorded automatically without selection of folder. Configuration menu overview The following table shows the list of menu items. The configuration images are different from each model.
System settings Maintenance Version Displays the current Model Name, Software, ISP and MCU version. System reboot Click the [Reboot] button to restart the IP device. It takes some minutes for the IP device to start again. Note: Click OSS(Open source software) link to check the information about Open source software. Refer to the [OPEN SOURCE SOFTWARE NOTICE] of [Reference]. Backup and restore >> Backup: To take a backup all of the settings.
Storage >> Remove the micro SD card 1. Click the [Unmount] button. If the micro SD card is unmounted from the system correctly, the [Unmount] button will be changed to the [Mount] button. 2. Remove the micro SD card from the micro SD card slot of the camera. Note: When you use the Unmount function, it may not progress immediately. Operations such as recording of the system and reading of data are required stop time before the Unmount function is activated.
Text Overlay >> Multi-Line Text: Enter characters in the text field. Maximum input characters are depends on the resolution. -- Applicable model: LND5110 / LNB5110 / LNV5110R / LND5110R / LNU5110R Capture Mode Font Size 0 1 2 3 -- Preview You can preview the camera image on the preview window. Mode >> Multiline Mode: Set more characters, color and size of the text overlay by selecting the [Multiline Mode]. The saved text overlay is displayed on the left top of screen.
Log & Report Audio & Video settings Camera Preview (Applicable model: LNB7210 / LNB5110) You can preview the camera image on the preview window. Note: The preview screen may differ depending on models. Log & Report status The System log provides a summary of the status of the IP device. The unit records the data of the software activity in a file. >> View Log: Click this button to display the system log information. -- Download: Click this button to see the log information of system.
Pivot 25 or 30 On Off On / Off 3 High Framerate 50 or 60 Off Off Off 2 Focus (Applicable model: LND5110 / LNV5110R / LND5110R / LNU5110R / LNV7210 / LND7210 / LNV7210R / LND7210R / LNU7210R / LNV7210RH / LNU7210RH) >> Capture Mode (Applicable model: LND5110 / LNV5110R / LND5110R / LNU5110R / LNB5110): Select the capture mode. Capture Mode 16:9 4:3 or 5:4 Resolution 1280 x 720 1280 x 1024 Note: If you change the Capture Mode option, the Privacy settings on the OSD menu is initialized.
Focus (Applicable model: LNB7210) Exposure >> Auto: Select [Auto] option on the [Focus] menu, then select the following mode. -- Focus Push: This function will be activated automatically to adjust the focus. -- Focus Reset: The focus position is located at factory default position. -- Manual: Use , , , , focus position manually. or button to adjust the Note: • When you mount the lens, press [Focus Reset] button to reset your focus.
1/10 000 1/5 000 1/2 500 1/1 500 1/1 000 Maximum Shutter 1/700 1/500 1/480 1/400 1/360 1/300 1/250 1/240 1/180 1/150 1/120 1/100 1/60 1/50 1/30 1/25 1/20 1/15 1/8 1/4 1/2 2/3 1 1.5 2 White Balance >> Flickerless: Remove the band noise caused by fluorescent light. Note: When the [IRIS] is set to [Manual], if the surrounding area is bright, can be seen flicker even if the [Flickerless] is set. In this case, set the [IRIS] to the [Auto].
Day/Night • Set the type of [Sensor] according to External Sensor type. The Day/Night mode is converted as below table. Sensor Type Normal Open Normal Close • >> Mode: Select [Mode] option on the [Day/Night] menu, then select the following mode. -- Auto: [Day/Night] mode can be changed to the [Auto] mode depending on the [Level] settings. -- Day: Maintains the color mode always. -- Night: Maintains the Black-and-white mode always.
SmartIR (Applicable model: LNV7210R / LND7210R / LNU7210R / LNV7210RH / LNU7210RH) Image >> Noise Reduction: If pictures are not clear due to noise, this option would reduce the noise of picture. When you use this function, the afterimage may occur. SmartIR (Applicable model: LNV5110R / LND5110R / LNU5110R) >> Color Saturation: Set the intensity of the color. >> Sharpness: The degree to which the boundary of the two portions is clearly distinguished.
Stream 20 15 10 5 4 3 2 1 O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O >> GOP size: It means “Group of Pictures”. The higher the GOP, the better is the video quality of the camera. Set the value of GOP from 1 up to 60 depending on Install Preset settings. This setting is valid for H.264 video format only. Profile Select the stream [Profile1], [Profile2], [Profile3] or [Profile4] depending on Install Preset. >> Quality: Select the Quality.
Audio PTZ config (Optional) Audio In >> Enable: Click the check box if you want to send the audio from the microphone input connector. PTZ protocol list >> PTZ protocol: Displays the selected PTZ protocol. Note: The Clients connected to the IP device remain unaffected with additional changes made in the setting. PTZ configuration >> Input: Select the type of audio input. (Line in, Microphone) >> Camera ID: Enter the PTZ device ID. Make the same ID as the PTZ Device.
Preset (Optional) Network settings Basic Preset Displays the registered preset position. 1. Move the camera to the point you want by using the arrow buttons. 2. Set the Pan, Tilt, Zoom or Focus step options. >> Add: Click to add a preset position. General >> MAC address: Displays the MAC address. Port & Encryption >> Network encryption: Select the HTTP or HTTPS option for security. 1. Enter the preset index and speed. 2. Click the [Add] button.
RTP stream TCP/IP RTP (Real-time Transport Protocol) is an internet protocol that allows programs to manage the real-time transmission of multimedia data, via unicast or multicast. IPv4 address status Profile >> Automatically set with DHCP: Select this option when a DHCP server is installed on the network to allow IP address assignment. With this setting, the IP address is assigned automatically.
DDNS Note: This free service is very useful when combined with the LG DDNS Server. It allows the user to connect the IP device using the URL, rather than an IP Address. This also solves the problem of having a dynamic IP address. If you want to deny or to allow a range of IP addresses, enter the start IP address to “From” and the end IP address to “To”. You can also add an IP address by entering the same IP address to “From” and “To”. 3. Click the [Save] button. 4.
User settings QoS You can specify network Quality of Service (QoS) settings. Basic The IP device is shipped with the login rights of administrator only. If others need to access the IP device excluding the configuration a login with viewer rights need to be created. A maximum of 50 users can be created. QoS DSCP Configuration >> Video DSCP: Enter the priority of Video for DSCP (Differentiated Service Code Point) Quality of Service. >> Audio DSCP: Enter the priority of Audio for DSCP Quality of Service.
Event settings >> Delete the registered user 1. Choose the user ID you want to delete. 2. Click the [Remove] button. Event server Note: Event Servers are used to receive the recorded video clip and/or notification messages. The default administrator user ID ‘admin’ and ‘anonymous’ are permanent and cannot be deleted. Anonymous >> Enable anonymous login Check the box to enable anonymous user login - allows the user access for only viewing the live stream image.
network. -- Receiving address: Type the recipients e-mail address. You can specify only one recipient e-mail address. -- Administrator address: Type the e-mail address of the administrator. -- Subject: Enter the subject/title of the e-mail. -- Message: This message can describe the information of the acquired IP address, etc. -- Test: Select [Test] to test the SMTP server. 3. Click the [Save] button to confirm the settings.
Motion Detect Audio detect Audio Detection Preview You can preview the motion detection window on the preview window. >> Enable: Set to [ON] or [OFF]. The Basic Configuration menu is displayed when selects [ON]. Basic Configuration >> Level: Select the level of audio detection from the drop-down list. You can set the level using by jog control. If you use jog control, the [Level] option is set to [Manual] automatically. General >> Sensitivity: Enter the sensitivity to detect an object in motion.
Additional Detect (Available up to three) >> To set the detect area 1. Set to [ON] the desired algorithm. Triggered Event When an event (VA/ Motion detect/ Sensor Event/Audio detect) occurs, this unit records the live images and routes as configured. 2. Click the [Set Zone] or [Set Line] button. 3. Click the left mouse button on the screen to set the detect area. -- Intrusion: When the perceived object is(are) move into the event area, the Intrusion Event is activated.
Scheduled Event Activation Time >> Always : You can use always by using the FTP server regardless of activation time. >> Only scheduled time: Continuously record according to the set time and the selected weekday. Drag and drop with left button of the mouse to set the channel and time you want to record. Action Set the below option. >> SD Card recording : Record to SD Card when event occurs. Selects the camera stream for SD card recording.
Reference Troubleshooting This section provides useful information to help you to resolve any difficulty you might have with your LG IP device. Fault symptoms, possible causes and remedial actions are provided here. IP Setting problems • ARP/Ping: Disconnect and reconnect the power to the network camera. The device should get the IP within 2 minutes. • Ping your camera: Open the command prompt on your computer, type ping with the IP address of the network device.
• If the client PC’s are unable to access the multicast stream, check with the system administrator for the use of a valid multicast address or check if the router is supporting multicasting. • If the images appear to have white of gray stripes on it, upgrade the Video graphics driver on the client PC to the latest version. • Video images may be noisy if you are using the camera in a very low light environment or the bit rate / quality is set to very low values.
Specifications Item Camera Video / Audio Event Interface Network LNB7210 Image Device 6.4 mm (1/2.8 Type) CMOS Lens Type CS mountable Day / Night ICR (Auto / Day / Night / External / Schedule) Minimum Illumination Color: 0.03 lx (F1.2, Gain : High, 1/30 sec, 50 IRE) B/W: 0.003 lx (F1.
Item Camera Video / Audio Event Interface Network LNB5110 Image Device 6.28 mm (1/3 Type) CMOS Lens Type CS mountable Day / Night ICR (Auto / Day / Night / External / Schedule) Minimum Illumination Color: 0.03 lx (F1.2, Gain : High, 1/30 sec, 50 IRE) B/W: 0.002 lx (F1.2, Gain : High, 1/30 sec, 50 IRE) WDR Support Image Enhancement Backlight Compensation, 2D+3D-DNR, De-fog, Exposure Control, AGC, White Balance, Privacy Masking, Sharpness, EIS, Pivot Compression H.264, H.
Item Camera Video / Audio Event Interface Network LND5110 Image Device 6.28 mm (1/3 Type) CMOS Lens Type 3 mm to 9 mm F1.2 Day / Night ICR (Auto / Day / Night / External / Schedule) Minimum Illumination Color: 0.03 lx (F1.2, Gain : High, 1/30 sec) B/W: 0.002 lx (F1.2, Gain : High, 1/30 sec) WDR Support Image Enhancement Backlight Compensation, 2D+3D-DNR, De-fog, Exposure Control, AGC, White Balance, Privacy Masking, Sharpness, EIS, Pivot Compression H.264, H.
Item Camera Video / Audio Event Interface Network LNV5110R LND5110R Image Device 6.28 mm (1/3 Type) CMOS Lens Type 3 mm to 9 mm F1.2 Day / Night ICR (Auto / Day / Night / External / Schedule) Minimum Illumination Color: 0.03 lx @ F1.2 (1/30 sec, 50 IRE) B/W: 0 lx @ IR LED on WDR Support IR Distance 30 m Image Enhancement Backlight Compensation, 2D+3D-DNR, De-fog, Exposure Control, AGC, White Balance, Privacy Masking, Sharpness, EIS, Pivot, Smart IR Compression H.264, H.
Item Camera Video / Audio Event Interface Network LNU5110R Image Device 6.28 mm (1/3 Type) CMOS Lens Type 3 mm to 9 mm F1.2 Day / Night ICR (Auto / Day / Night / External / Schedule) Minimum Illumination Color: 0.03 lx @ F1.2 (1/30 sec, 50 IRE) B/W: 0 lx @ IR LED on WDR Support IR Distance 40 m Image Enhancement Backlight Compensation, 2D+3D-DNR, De-fog, Exposure Control, AGC, White Balance, Privacy Masking, Sharpness, EIS, Pivot, Smart IR Compression H.264, H.
Item Camera Video / Audio Event Interface Network LNV7210 LND7210 Image Device 6.4 mm (1/2.8 Type) CMOS Lens Type 3 mm to 9 mm F1.2 (x3 Zoom) Day / Night ICR (Auto / Day / Night / External / Schedule) Minimum Illumination Color: 0.03 lx @ F1.2 (1/30 sec, 50 IRE) B/W: 0.003 lx @ F1.2 (1/30 sec, 50 IRE) WDR Support Image Enhancement Backlight Compensation, 2D+3D-DNR, De-fog, Exposure Control, AGC, White Balance, Privacy Masking, Sharpness, EIS, Pivot Compression H.264, H.
Item Camera Video / Audio Event Interface Network LNV7210R Image Device 6.4 mm (1/2.8 Type) CMOS Lens Type 3 mm to 9 mm F1.2 (x3 Zoom) Day / Night ICR (Auto / Day / Night / External / Schedule) Minimum Illumination LND7210R Color: 0.03 lx @ F1.2 (1/30 sec, 50 IRE) B/W: 0 lx @ IR LED on WDR Support IR Distance 20 m Image Enhancement Backlight Compensation, 2D+3D-DNR, De-fog, Exposure Control, AGC, White Balance, Privacy Masking, Sharpness, EIS, Pivot, Smart IR Compression H.264, H.
Item Camera Video / Audio Event Interface Network LNU7210R Image Device 6.4 mm (1/2.8 Type) CMOS Lens Type 3 mm to 9 mm F1.2 (x3 Zoom) Day / Night ICR (Auto / Day / Night / External / Schedule) Minimum Illumination Color: 0.03 lx @ F1.2 (1/30 sec, 50 IRE) B/W: 0 lx @ IR LED on WDR Support IR Distance 30 m Image Enhancement Backlight Compensation, 2D+3D-DNR, De-fog, Exposure Control, AGC, White Balance, Privacy Masking, Sharpness, EIS, Pivot, Smart IR Compression H.264, H.
Item Camera Video / Audio Event Interface Network LNV7210RH Image Device 6.4 mm (1/2.8 Type) CMOS Lens Type 3 mm to 9 mm F1.2 (x3 Zoom) Day / Night ICR (Auto / Day / Night / External / Schedule) Minimum Illumination Color: 0.03 lx @ F1.2 (1/30 sec, 50 IRE) B/W: 0 lx @ IR LED on WDR Support IR Distance 20 m Image Enhancement Backlight Compensation, 2D+3D-DNR, De-fog, Exposure Control, AGC, White Balance, Privacy Masking, Sharpness, EIS, Pivot, Smart IR Compression H.264, H.
Item Camera Video / Audio Event Interface Network LNU7210RH Image Device 6.4 mm (1/2.8 Type) CMOS Lens Type 3 mm to 9 mm F1.2 (x3 Zoom) Day / Night ICR (Auto / Day / Night / External / Schedule) Minimum Illumination Color: 0.03 lx @ F1.2 (1/30 sec, 50 IRE) B/W: 0 lx @ IR LED on WDR Support IR Distance 30 m Image Enhancement Backlight Compensation, 2D+3D-DNR, De-fog, Exposure Control, AGC, White Balance, Privacy Masking, Sharpness, EIS, Pivot, Smart IR Compression H.264, H.
