Installation Manual

38 Multi Air Conditioner

Connecting the Cable between Indoor Unit, Distributor Unit and Outdoor Unit

Connect the cable to the Outdoor unit

1. Remove the control cover from the unit by

loosening the screw.

Connect the wires to the terminals on the control

board individually as the following.

2. Secure the cable onto the control board with the

holder (clamper).

3. Re-attach the cover control to the original

position using the screws.

* The feature may be changed according to the

type of model.

Power

supply cable

Power

supply cable

Connecting cable

(to the indoor unit)

Connecting cable

(to the indoor unit)

Conduit

hole

18/24 kBtu/h class 30/36 kBtu/h class

Connecting cable terminal

Cord clamp

Power cord terminal

Cord clamp

* Make sure the rubber

bushes are Properly

used in knock-out

holes after connecting

main power cable.

48/54 kBtu/h class