Owner's Manual

2.6 Reset Default
Allows you to reset your phone to the factory default
settings.
1. Press
,, .
2. Enter the 4-digit password.
The default lock code is commonly ‘0000’.
3. Press Reset Default .
4. Read the screen message, then press .
5. Press Revert to change your phone settings
back to the factory defaults or press Cancel
to exit without changing.
2.7 Set NAM
Allows you to select NAM Type.
(Do not change the setting. Contact Reliance.)
1. Press
,, .
2. Enter the 4-digit password.
The default lock code is commonly ‘0000’.
3. Press Set NAM .
4. Use to select a setting, then press .
NAM1/NAM2
USING PHONE MENUS
70
USING PHONE MENUS
Note
If you choose to revert, the phone will turn itself off,
then back on again.
RD6500.qxd 1/10/06 3:05 PM Page 70