Owner's Manual

Write Text
LMS(Long Message Service) allows you to send a message up to 462
characters at a time. Before sending LMS message, total number of SMS
packets formed are intimated to the user and confirmation is taken to send.
Maximum 3 packets for English and 4 for Hindi messages can be sent. Each
LMS packet is received as individual message. Every LMS message shows the
packet sequence number in the message for ex: In case of 3 packets, <1/3>,
<2/3>, <3/3>.
1. Press Soft Key 1 Menu, or .
2. Select Write.
3. Select Write Text.
4. Type your desired message and press Soft Key 1 Options.
G
Send Use to send the message.
G
Text Mode Use to select text type (entry mode).
G
Templates Select a sample message.
G
Save Save message to draft.
G
Insert Number Insert the desired number saved in phone.
G
Add Signature Insert signature (pre edited in Msg Setting).
5. After selecting Send, enter the contact number where the message is to be
sent, enter the next recipients address by pressing . You can add up to
10 recipients. Press Soft Key 1 Options.
MESSAGES
12
RD3530_Slim_Eng_081106 2008.11.7 5:18 PM Page 12