Installation Manual

15
Fig.1 Mounting Type Fig.2 Clamping Type
①
②
①
②
①
②
①
②
A
B
B
A
① : 270mm(10.6 in)
② : 370mm(14.6 in)
Front : 5400Pa(113psf)
Rear : 4300Pa(90psf)
A : 250mm(9.8 in)
B : 400mm(15.7 in)
Front : 5400Pa(113psf)
Rear : 4300Pa(90psf)
Fig.3 Clamping Type Fig.4 Clamping Type
A
B
B
A
A
B
A
B
A : 250mm(9.8 in)
B : 400mm(15.7 in)
Front : 5400Pa(113psf)
Rear : 4300Pa(90psf)
A : 120mm(4.7 in)
Front : 1800Pa(37.5psf)
Rear : 1800Pa(37.5psf)
B : 250mm(9.8 in)
Front : 2850Pa(60psf)
Rear : 2850Pa(60psf)
Fig.5 Clamping Type Fig.6 Clamping Type
A
B
B
A
C
C
B
A
①
②
①
②
①
①
* 4 point installation is allowed in the following cases:
1. Slope roof: If module is installed parallel to the rooftop.
2. Flat roof: If installed with an additional stand such as wind
shield or de ector.
A : 250mm(9.8 in)
B : 400mm(15.7 in)
Front : 5400Pa(113psf)
Rear : 4300Pa(90psf)
A : 120mm
(4.7 in)
*4point(①)
Front : 1800Pa(37.5psf)
Rear : 1800Pa(37.5psf)
C : 120mm(4.7in)
Front : 3200Pa(67psf)
Rear : 1800Pa(37.5psf)
A : 120mm
B : 980 ±100mm
(38.6±3.9 in)
6point(①+②)
Front : 5400Pa(113psf)
Rear : 4300Pa(90psf)
Note) All mechanical installation method(Fig.1 to Fig.7) in this appendix were not tested by Intertek.
(UL 1703, ULC 1703) It is evaluated by LG internal test.
Mechanical Installation : 72Cell Model