Owner's Manual

22
PTZ Camera Control
You can control the cameras connected via the data
port of RS-422/485 terminal. You must set the con-
figuration between the PTZ camera and the DVR.
1. Select the PTZ camera channel on the main mon-
itor you want to control.
2.
Press PTZ or Click the PTZ icon in the system
control bar.
Virtual PTZ remote control is displayed on the
main monitor.
3.
Use each item to control the PTZ camera.
a Exit
Remove the PTZ virtual remote control.
b v/V/b/B
Use to pan/tilt the camera.

Confirm the preset position.
c ZOOM + / -
To adjust the camera zoom.
dFOCUS + / -
To manually adjust the focus of a camera.
eIRIS + / -
To manually adjust the iris of a camera.
fDisplays the Selected Preset Number
gNumber Buttons
To input the preset number.
hSET
To register preset positions.
iMOVE
To move the camera to the preset position.
jCLEAR
To delete a memorized preset position.
kTOUR
To start a preset tour.
lSETUP
To displays the setup menu of the PTZ camera.
a
b
c
d
e
f
g
j
k
l
h
i