Owner’s Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- PRODUCT OVERVIEW
- INSTALLATION
- OPERATION- Before Using
- Control Panel
- Wash Cycles
- Options and Extra Functions
- Loading the Dishwasher
- Loading the Silverware Basket
- Loading the Lower Rack
- Loading the Upper Rack
- Loading the Cutlery Rack
- Adding Cleaning Products
 
- SMART FUNCTIONS
- MAINTENANCE
- TROUBLESHOOTING
- LIMITED WARRANTY
15INSTALLATION
ENGLISH
Sliding Dishwasher into 
Cabinet Opening
How to Slide Dishwasher
CAUTION
• Do not pull or lift the dishwasher using the 
handle 
a. Doing so can damage the door and 
hinges.
• Do not push the door of the dishwasher with 
knees when sliding the dishwasher into position. 
Doing so can damage the front cover.
• Do not push the top of the dishwasher. Doing so 
can damage the interior of the dishwasher.
NOTE
• Open the door and grab the body frame and the 
top front opening b of the tub to move or lift the 
dishwasher.
1  Align the dishwasher with the opening. Make 
sure the water supply line and electrical cable 
are in the correct positions to slide into their 
channels properly.
2  Smooth out or pad the edges of the hole 
drilled for the water supply to avoid damaging 
the drain hose.
3  Make sure the drain hose is straight before 
feeding the end of it through the hole for the 
water supply. As you slide the dishwasher into 
the opening, you will want to slowly pull on 
the drain hose from inside the cabinet to take 
up some slack. Be careful not to kink, pinch, 
crush or stress the drain hose during 
installation to avoid leaking and water 
damage.










