Owner’s Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- PRODUCT OVERVIEW
- INSTALLATION
- OPERATION- Before Using
- Control Panel
- Wash Cycles
- Options and Extra Functions
- Loading the Dishwasher
- Loading the Silverware Basket
- Loading the Lower Rack
- Loading the Upper Rack
- Loading the Cutlery Rack
- Adding Cleaning Products
 
- SMART FUNCTIONS
- MAINTENANCE
- TROUBLESHOOTING
- LIMITED WARRANTY
8 PRODUCT OVERVIEW
• White (steady): Normal operation.
• White (blinking): Cycle has been paused. (After 
four minutes in pause mode, the machine turns 
off.)
• Green: Cycle finished normally.
The default ON setting keeps the green light on 
until the door is opened. If the setting is changed 
to OFF, the green light turns off after 90 seconds. 
To change the setting, turn the power on and 
press and hold the High Temp. button for 3 
seconds until ON or OFF appears in the display. 
The setting is stored until you change it.
Interior View
a Top Wash Impeller
b Upper Spray Arm
c Lower Spray Arm
d Filtration System
e Detergent and Rinse Aid Dispenser
f Drying Vent Cover
g Steam Nozzle
h Lower Rack (appearance may vary)
i Silverware Basket
j Upper Rack
k Cutlery Rack
†
l Tub Light
†
† This feature is only available on some models.
NOTE
• The silverware basket ships installed at the back 
of the bottom rack. For best performance, install 
it along the right side.
• Remove all packing materials from the exterior 
and interior of the dishwasher before installing 
the appliance.
• Press the tab to remove the cable tie by hand. 
Cutting the tie with a knife or scissors may 
damage the rack or the silverware basket.
Accessories
a Installation Brackets (2 ea)
b Wood Screws (4 ea)
c Hose Clamp
Product Specifications
The appearance and specifications listed in this 
manual may vary due to constant product 
improvements.
a
b
c










