User guide

11
Setup
6-pin Dip Switch Setting
This camera has the 6-pin Dip
Switch for setting.
1. ELC / ALC
ELC (Electronic IRIS), ALC
(Auto IRIS)
The default setting is ELC.
2. FL (Flickerless)
Use for removing the flicker of
picture.
The default setting is OFF.
3. AWB/HOLD
AWB (Auto White Balance),
HOLD (White Balance Hold).
The default setting is AWB.
4. BLC
Backlight compensation elimi-
nates strong background light
which makes the camera pic-
ture dark such as a spotlight.
You can select the mode for
adjusting the iris lens.
The default setting is OFF.
5. L/L
Not used.
6. AGC (Auto Gain Control)
If the image are too dark,
change the maximum value to
make the image lighter. The
D&N function is activated auto-
matically AGC ON mode.
The default setting is ON.