OWNER'S MANUAL Color Video Camera Please read this manual carefully before operating your set and retain it for future reference.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
FCC nd found sA of the ned gainst ipment is ment. This n radiate nstalled nstruction rence to of this ikely to h case the inter- nock-outs n the in the end n if batReplaced alent type acturer. cording to ns. h insulatmooth well provided WARNING: Do not install this equipment in a confined space such as a bookcase or similar unit. WARNING: This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
Important Safety Instructions Safet 1. 2. 3. 4. 5. Do not ble the Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
tus. cesanufac- tripod, d by the h appad, use cart/ o avoid ring unused lified ing is atus has y, such plug is n spilled o the has moisture, y, or has Safety Precautions Do not attempt to disassemble the camera Avoid the camera with direct sunlight Do not use strong solvents or detergents Handle the camera with care To prevent electric shock, do not remove screws or covers. There are no user serviceable parts inside. Ask a qualified service personnel for servicing.
What's in the box Cons Front V Video Cable Power Cable Camera Body M4 Tapping Screws (2 EA) (Pan Lock Screw) Optional Adapter (DC 12 V, 300 mA) Side V
Construction Front View 6-pin Dip Switch Tilt Base Focus Lock Screw Side View Lens Tilting Lock Screw Dome Cover Separatory Spring
Installation Insta Camera Installation Camer 1. Aim the LG logo of the Dome Camera to face the place that you wish to watch. 2. Tighten the M4 Tapping Screws to fix the Dome Camera on the ceiling, then adjust the Pan (Left /Right) by moving the Pan Base. Tighten the M4 Tapping Screws after adjustment. 3. Loosen the Tilting Lock Screw. Adjust the Tilt(Up /Down) by moving the Tilt Base then tighten Tilting Lock Screw. 4. Loosen the Focus Lock Screw.
wish to ceiling, n the Installation Camera Connection Connect the Power Adapter (DC 12 V, 300 mA; optional) to the Power Input Jack of the camera as shown below. Power Input Jack Power Adapter (Not supplied) Adapter Jack ing the Focus BNC ckwise Monitor e dam- ed an at a black era.
Installation Setu Notes: 6-pin D • When you disassemble the Dome Cover, lift the Dome Cover Separatory Spring on the opposite side of LG Logo and turn the Dome Cover clockwise simultaneously. This cam Switch fo Dome Cover Separatory Spring • When you install the camera, handle with care. The camera could be damaged by improper handling or storage. • If this camera is mounted on the other places except ceiling, you need an extra bracket for mounting.(not supplied) 10 1.
over urn the Setup 6-pin Dip Switch Setting This camera has the 6-pin Dip Switch for setting. 2. FL (Flickerless) Use for removing the flicker of picture. The default setting is OFF. 3. AWB/HOLD AWB (Auto White Balance), HOLD (White Balance Hold). The default setting is AWB. 4. BLC Backlight compensation eliminates strong background light which makes the camera picture dark such as a spotlight. You can select the mode for adjusting the iris lens. The default setting is OFF. 5. L/L Not used. era ing, 1.
Troubleshooting Check the following guide for the possible cause of a problem before contacting service. The picture is poor Does the Dome Cover have lots of dust on the surface? - Use a dry cloth to clean the camera when it is dirty. Smear may be caused to the screen of night than daytime. - Adjust the Focus by moving the Focus Lens. 12 Dime Contrast of the screen is not clear. Check the condition of the monitor. A light source such as a spot light causes burn-in on the display screen.
not Dimension ø 100 monitor. ot light ay ngle trong ars 76.5 mm 26.
Specifications Model Signal System Total/Effective Pixels Pick-Up Device Lens Angular Field of View(D) Focus Signal Process Scanning System Sync. System Scanning Frequency Resolution S/N Ratio Standard Illumination Minimun Illumination Video Output Signal Gain Control Shutter speed White Balance Back Light 14 LD300P-B/C/D/E/F LD300N-B/C/D/E/F PAL NTSC 470 K / 440 K 410 K / 380 K 8.5 mm interline color CCD(Super HAD) Fixed Lens (F=3.0 mm (LD300-B), 3.7 mm (LD300-C), 6.0 mm (LD300-D), 8.
E/F K D) 6.0 mm 300-F)) mm), Specifications Model Power Source Power Consumption Operating Temp. Storage Temp. Weight Dimensions LD300P-B/C/D/E/F LD300N-B/C/D/E/F DC 12 V Less than 2.3 W -10 ºC to 50 ºC (Humidity :0 % RH to 60 % RH) -20 ºC to 60 ºC (Humidity :0 % RH to 85 % RH) 205 g ø 120 (Diameter) x 76.
AB28
