Owner's Manual

30
SYSTEM Setting
1. Select the [SYSTEM] menu.
2. Press [SET] button and the SYSTEM menu appears.
3. Use [UP] or [DOWN] button to select the option.
• FACTORY RESET: To reset the camera setting
to factory setting, select the [FACTORY RESET]
option.
• COMMUNICATION
> CAMERA ID: You can use the camera
identification [CAMERA ID] to assign a
number to the camera. Use [LEFT] or [RIGHT]
to select a CAMERA ID.
> PROTOCOL: Select a protocol for RS-485
communication.
> BAUD RATE: Set the speed of communication
between the camera and the RS-485 unit.
> SAVE & REBOOT: To confirm the
communication settings.
4. Press [SET] button to confirm your selection.
Notes:
• You need to set up [Save & Report] for save [Camera
ID], [Protocol], [Baud & Rate] changes.
• The menu screen is move to top menu, after set up
[Factory Reset].