Owner's Manual

23
OFF on the STATE.
• Use [UP] or [DOWN] to select an option then use
[LEFT] or [RIGHT] button to adjust the option.
> POSITION ,/: Moves horizontal position
of the mask.
> POSITION ;.: Moves vertical position of
the mask.
> SIZE ,/ : Enlarge or decrease the
horizontal size of the mask.
> SIZE ;. : Enlarge or decrease the vertical
size of the mask.
4. Use [SENSITIVITY] option to obtain the optimum
detection level.
5. Use [LEFT] or [RIGHT] button to select the DISPLAY
option.
6. Use [LEFT] or [RIGHT] button to select the ALARM
OUT option.
3D-DNR Setting
1. Select [3D-DNR] option.
If pictures are not clear due to brightness, this option
would reduce the noise of picture.
2. Use [LEFT] or [RIGHT] button to select a value.