User guide

12
Installation
3
Installation
Connecting Display device
The video signal connection between the camera and the
monitor.
Display device connection
ALARM input connection
You can connect up to 4 alarm sensors to the camera. Each
alarm sensor should be connected with Alarm IN COM. You
can adjust the signal state to NO (normally open) or NC
(normally closed) through the setup menu.
1. Connect the Adapter cable to the Alarm In Data
Terminal of the camera.
2. Connect the alarm device to the Adaptor cable.
When connecting lines, check and connect the color
lines of the each device correctly. Refer to the below
tables for color line information.
Do not connect one alarm sensor to the several
camera’s alarm input connector.
>
Caution
Alarm input connection
E
D
C
B
A
Alarm device
Alarm In Data Terminal
Alarm device
Alarm device
Alarm device
Adaptor Cable
Adaptor cable
No Description
A
ALARM IN 1
B
ALARM IN 2
C
ALARM IN COM
D
ALARM IN 3
E
ALARM IN 4