User guide

29
Operation
D-EFFECT (Digital eect) setting
This model support D-EFFECT function by Auto Flip.
Color setting
You can switch the displayed picture to grayscale or color.
1. Select [COLOR] option on the [SPECIAL] menu.
2. Use [Near] or [Far] button to change a color effect.
• ON: To display the picture with color.
Select ON and Press [Open] or [Close] to display
the submenu.
You can adjust the color level using the [Near] or
[Far] button.
• OFF: To display the picture with grayscale.
Freeze setting
1. Select [FREEZE] option on the [SPECIAL] menu.
2. Use [Near] or [Far] button to set up the ON or OFF.
Sharpness setting
Sharpens the image outline.
1. Select [SHARPNESS] option on the [SPECIAL] menu.
2. Use [Near] or [Far] button to change a adjust the
option. If you set the sharpness value to higher, the
image outline becomes sharp. If you set to lower
value, the image outline becomes dim.
Stabilizer setting
The image stabilizer function minimizes the appearance
of shaky images caused by low-frequency vibration.
This function is useful for outdoor surveillance.
Select [STABILIZER] option and set to ON or OFF.
Note:
If you set the [STABILIZER] to ON, the Digital zoom is set
to [x1.1] automatically.
OSD setting
You can set the Function On-Screen Display options using
the [OSD] menu.
The Function On-Screen Display of this camera can be
turned on or off.
1. Select [OSD] option on the [SPECIAL] menu.
2. Use [Near] or [Far] button to select a [ON] and press
[Open] or [Close]. The OSD menu appears.
3. Use [In] or [Out] to select an option then use [Near]
or [Far] button to set the option.
• ON: Displays the Function OSD on the screen.
• OFF: The Function OSD does not appear on the
screen.