User guide

27
Operation
> INDOOR: The color temperature range for
the proper white balance is approximately
3 200 K.
> OUTDOOR: The color temperature
range for the proper white balance is
approximately 5 100 K.
- RED: Set the desired red value.
- BLUE: Set the desired blue value.
Day/Night setting
1. Select [DAY/NIGHT] option on the [CAMERA SET]
menu.
2. Use [Near] or [Far] button to select mode for day/
night function.
• AUTO: You will be able to change the Day/Night
mode automatically.
- D/N LEVEL: Use [Near] or [Far] button to select
a level.
- DWELL TIME: Use [Near] or [Far] button to
select a dwell time.
- BURST MODE: Select [ON] or [OFF] to set the
color burst in Night status.
Note:
If you set the AGC to [OFF] or the SHUTTER is set
to one of the SHUTTER options except AUTO on
the [EXPOSURE] menu, the AUTO mode of the
DAY/NIGHT function is not available and [---] mark
is displayed.
• DAY: Color mode enabled.
• NIGHT: Black-and-white mode enabled.
Motion Detection setting
The motion detection detects the moving objects in the
scene by monitoring changes in brightness level. You can
select the level of sensitivity for motion detection to 4
zone.
1. Select [MOTION DET] option on the [CAMERA SET]
menu.
2. Use [Near] or [Far] button to select a [ON] and press
[Open] or [Close]. The MOTION DETECTION menu
appears.
• SMART MD : You can detect the movement of
objects easily by displaying motion mask.
• REGIONAL MD : Use [Near] or [Far] button to
select [ON] then press [Open] or [Close].
- Use [Near] or [Far] button to select a zone
number (ZONE1 to ZONE4) on the [ZONE
NUMBER] option.
- Use [Near] or [Far] button to set up the ON or
OFF on the [ZONE STATE] option. If you set to
ON, the zone frame appears on the center of
the monitor.
- Use [In] or [Out] to select an option then use
[Near] or [Far] button to adjust the option
> WIDTH: Enlarge or decrease the horizontal
size of the zone frame.
> HEIGHT: Enlarge or decrease the vertical
size of the zone frame.
> MOVE X: Moves horizontal position of the
zone frame.
> MOVE Y: Moves vertical position of the
zone frame.
3. Use [SENSITIVITY] option to obtain the optimum
detection level.