User guide

19
Connections
Preset 1
Preset 2
Preset 3
Alarm 1
Alarm 2
Alarm 3
Preset 4
Alarm 4
Alarm signal
input
Before inputting
the alarm signal
Function status Manual mode
While observe a
specific position.
Change the observe position to
the alarmed position then keep
observe the alarmed position and
you cannot control the camera. If
you want to control the camera,
you should set the Duration Time
of Alarm Input function to "1 to
255" using the LKD1000 controller.
While operating
Preset Tour
function.
Stop preset touring and change
the observe position to the
alarmed position then keep
observe the alarmed position.
While operating
Auto Pan function.
Stop auto panning and change the
observe position to the alarmed
position then keep observe the
alarmed position.
While operating
Pattern function.
Stop operating pattern function
and change the observe position
to the alarmed position then keep
observe the alarmed position.
• Auto mode: Change the observe position to a sensor
that senses a touch or shock then return to the
position that previously observed. (Set the Duration
Time of Alarm Input function to “1 to 255”.)
<Example : If this unit receives signal from “Alarm 4”>
Preset 1
Preset 2
Preset 3
Alarm 1
Alarm 2
Alarm 3
Preset 4
Alarm 4
Alarm signal input
Before inputting
the alarm signal
Released
alarm signal
Function status Auto mode
While observe a
specific position.
Change the observe position to
the alarmed position then return
to the position that previously
observed.
While operating
Preset Tour
function.
Stop preset touring and change
the observe position to the
alarmed position then restart the
preset touring again.
While operating
Auto Pan function.
Stop auto panning and change the
observe position to the alarmed
position then restart the auto
panning again.
While operating
Pattern function.
Stop operating pattern function
and change the observe position
to the alarmed position then
restart the pattern function again.
Note:
The Alarm In 1 is Preset 1, Alarm In 2 is Preset 2, Alarm In 3
is Preset 3 and Alarm In 4 is Preset 4.