Specification

2 of 2
F
E
I
F
I
G
B
A
3/24
© 2022 LG Electronics USA, Inc. All rights reserved. “LG Life’s Good” is a registered trademark of LG Corp. All other product and brand names
are trademarks or registered trademarks of their respective owners. Design, features and speci󳣜cations are subject to change without notice.
Non-metric weights and measurements are approximate. Some features may require Internet access. Content and services may vary by product
and are subject to change without notice.
DIMENSIONS / CLEARANCES
LCE3010SBE
30” Min.
(762 mm)
** Do not obstruct these areas!
4" X 8" (102 mm x 203 mm)
opening to route armored
cable if panel is present.
Recommend space cooktop and oven
Overhead cabinet should not exceed a maximum
depth of 13” (330 mm).
3 3/4” (95 mm)
min. from
edge of cooktop
to nearest
combustible wall
(either side of unit).
2 1/2”
(64 mm)
Empty space is needed underneath
the cooktop for installation purposes.
Approximate location of junction box.
12”
(305 mm)
10”
(254 mm)
18”
(457 mm)
36” Min
(914 mm)
24”
(610 mm)
Min. recommended
distance between
rear edge of cutout
and nearest
combustible
surface.
2 3/4” (70 mm)
DIMENSIONS / CLEARANCES
A 30
2727
/
3232
" (783 mm)
B 21
1515
/
3232
" (545 mm)
C 3
33
/
44
" (95 mm)
D 28
1313
/
1616
" (732 mm)
E 19
55
/
88
" (498 mm)
F 29
33
/
88
" Minimum (746 mm)
G 20
11
/
44
" Minimum (515 mm)
H
1313
/
1616
" (20 mm)
I 13" Maximum (330 mm)
J 5
2323
/
3232
" Minimum (145 mm)
K 2
11
/
22
" (64 mm)
L 24" (610 mm)
INSTALLATION NOTES
• Allow 2" (50 mm) space below the
armored cable opening to clear
the electric cable and allow space
for installation of the junction
box on the wall at the back of the
cooktop.
• Make sure the cabinets and wall
coverings around the cooktop can
withstand the temperatures up to
200˚F generated by the cooktop.
• To eliminate the risk of burns
or 󳣜re by reaching over heated
surfaces, cabinet storage space
located above the cooktop should
be avoided. If cabinet storage
is provided, risk can be reduced
by installing a range hood that
projects horizontally a minimum of
5" (127 mm) beyond the face of the
cabinets.
• It is very important to keep 2
33
/
44
"
(70 mm) distance between the
cooktop and the oven.