Owner's Manual

Operating instructions
16 Air Conditioner
Function setting : Individual vane angle control
Installer Setting-Celsius / Fahrenheit Switching
This function is used for switching the display between Celsius and Fahrenheit.
It is the function that can control 4 vane angles individually in the ceiling type 4Way cassette product
group.
Press the VANE ANGLE button.
Individual vane angle control symbol will blink.
• If you press the VANE ANGLE button for 3 seconds in that time,
all vanes are set to standard angle.
1
Set each vane angle by pressing the VANE ANGLE button.
• There may be differences between wireless remote controller up/down/left/right buttons and the wind discharge
port directions.
• Set desired angle with checking the vane angle movement of the product.
• The individual vane control function is an additional function of a product, and it may not work in some products.
2
Press SET/CLEAR button to reserve or cancel the individual vane
angle control function.
3
Press the °C/°F SWITCH button to change from Celsius to Fahrenheit or from Fahrenheit to Celsius.
Whenever press TEMPERATURE SETTING button in Fahrenheit mode, the temperature
will increase/drop 1°F.