User Guide

APPLICATION GUIDELINES | 37
Application Guidelines
'XHWRRXUSROLF\RIFRQWLQXRXVSURGXFWLQQRYDWLRQVRPHVSHFL¿FDWLRQVPD\FKDQJHZLWKRXWQRWL¿FDWLRQ
©
/*(OHFWURQLFV86$,QF(QJOHZRRG&OLIIV1-$OOULJKWVUHVHUYHG³/*´LVDUHJLVWHUHGWUDGHPDUNRI/*&RUS
Cooling
Heating
9k,12k
20(65.6)12.5(41) 30(98.4)
Total Pipe Length[m(ft)]
Capacity(%)Capacity(%)
100
90
95
7.5(24.6)
7.5(24.6)
100
95
9k,12k
20(65.6)12.5(41) 30(98.4)
Total Pipe Length[m(ft)]
EQUIPMENT SELECTION PROCEDURE
Cooling/Heating Correction Factors
For Single Zone Art Cool Mirror systems, calculate the equivalent length of the liquid line from the outdoor unit to the indoor unit. Also, de-
termine the elevation difference of the indoor unit above or below the outdoor unit. Find corresponding cooling or heating capacity correction
factors as shown in Figures 5 through 8. Multiply the correction factors by the cooling or heating capacity obtained from the capacity tables
using design conditions. The resultant is the NET cooling or heating capacity.
Figure 5: /$+69/$+69&RROLQJ&RHI¿FLHQW)DFWRU
Figure 6: /$+69/$+69+HDWLQJ&RHI¿FLHQW)DFWRU