Owner’s Manual

23OPERATION
ENGLISH
FRANÇAIS ESPAÑOL
Using the Low Heating Function
(Optional)
This function operates the heating system to maintain
a minimum room temperature and prevent objects in
the room from freezing where there is no permanent
resident, such as a vacation.
• , are displayed on the display screen.
NOTE
• This function is available with Heating Mode.
• During LH operation, when you press buttons such
as , , MODE, FAN SPEED, and then return
to Heating Mode.
• If JET MODE button is pressed during LH
operation, this function is disabled and Power
Heating Mode is operated immediately. (only for
power heating model)
• In case an error occurred, operation can be
interrupted for the protection of the product.
• COMFORT AIR and
SWING
button cannot be used
while the LH function is in operation.
Using the Mosquito Away Function
(Optional)
This function fans away mosquitos by generating a
high-frequency wave.
• is displayed on the display screen.
NOTE
• You can use this function without turning the air
conditioner on.
• is displayed on some indoor units.
Using the Auto Clean Function
In the Cooling and Dehumidification Mode, moisture
is generated inside the indoor unit. This function
removes such moisture.
• is displayed on the display screen.
NOTE
• Some functions cannot be used while the Auto
Clean function is in operation.
• If you turn off the unit, the fan continues to run for
30 minutes and cleans the inside of the indoor unit.
• is displayed on some indoor units, depending
on the model.
Using the Comfort Sleep Function
(Optional)
This function operates the air conditioner
automatically to make the comfortable sleep
environment.
• , are displayed on the display screen.
NOTE
• This function is available with Cooling Mode.
• The vane stops swing and sets indirect airflow
angle, after 30 minutes from start even though
the room temperature doesn’t decrease to optimal
temperature to sleep.
• It is possible that a comfortable sleep environment
is different according to the people.