USER MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operation and retain it for future reference. webOS 4.0 LED www.lg.
ENGLISH CONTENTS SETTINGS.......................................5 -- Home........................................................................................5 -- Sound....................................................................................31 [Sound Mode] Global Buttons [Sound Out] Dashboard [Audio Out] [Content Manager] -- Ez Setting..............................................................................6 [Video Wall] [AV Sync Adjustment] [Digital Audio Input] -- Admin......
ENGLISH IR CODE....................................... 52 CONTROLLING MULTIPLE PRODUCTS................................... 54 -- Connecting cables..........................................................54 -- Communication Parameter.......................................55 -- Command Reference List...........................................56 -- Transmission/Reception Protocol..........................
NOTE ENGLISH •• Software-related content may be changed without prior notice due to upgrades of the product functions. •• Some features described in the User Manual may not be supported in certain models and countries. •• Some submenus of each function may not be supported depending on the model. •• SNMP 2.0 is supported.
Home Global Buttons LAEC(AIO) •• •• [Position]: Navigate to the OSD Output Position Selection screen. [MOBILE URL]: Provides information necessary to access the monitor set through an external device's browser. With this feature, you can view QR code and URL information. In addition, by accessing the URL, you can also run Content Manager and Group Manager 2.0, and Control Manager. (This featured is optimized for Google Chrome.
ENGLISH Ez Setting [Video Wall] LAEC(AIO) [Ez Setting] [Video Wall] Set Video Wall options to create a wide visual canvas. •• [Tile Mode]: Turn [Tile Mode] on or off. •• [Tile Mode Settings]: Display a single integrated screen on multiple Signage monitors. •• [Natural Mode]: Display the image excluding the area that overlaps with the monitor's bezel so that the image displayed has a more natural feel to it. •• [Frame Control]: Adjust the sets that run [Scan Inversion] and frame deviation.
[Server Setting] [Ez Setting] [Server Setting] Set up to connect your signage to a SuperSign server. •• CMS Server •• Control Server [Fail Over] LAEC(AIO) [Ez Setting] [Fail Over] Set the priority of the input devices when a fault occurs. Automatically play the content stored in the device or run the set app. •• [On/Off]: Turns [Fail Over] on or off. •• [Input Priority]: Set the priority of input sources for fail over.
[Status Mailing] ENGLISH LAEC(AIO) [Ez Setting] [Status Mailing] This feature configures the system so that the status of the device is assessed and then notified to the administrator by e-mail. •• [On/Off]: Turns [Status Mailing] on or off. •• [Mailing Option], [Scheduling]: Sets the email sending interval. •• [User E-mail Address]: Set the user email address of the sender. •• [Sending Server(SMTP)]: Set the address of the SMTP server. •• [ID]: Enter the account ID of the sender.
[Play via URL] [Ez Setting] [Play via URL] Play content you want to play automatically through the built-in web browser. •• [URL Loader]: Turns [Play via URL] on or off. •• [Set URL]: Enter the URL address to display automatically. •• [Preview]: Preview your desired website by accessing the specified URL. •• [Save]: Save the specified URL. •• [Reboot to Apply]: Restarts the monitor set after saving the specified URL. •• [Reset]: Reset to initial settings.
[LG ConnectedCare (Signage 365 Care)] ENGLISH LAEC(AIO) [Ez Setting] [LG ConnectedCare (Signage 365 Care)] You can install the LG ConnectedCare (fault diagnosis) solution for fault diagnosis and prediction service. •• [Install]: Installs the LG ConnectedCare solution. 1) [ENTER ACCOUNT NUMBER]: Enters the 6-digit account number to install the LG ConnectedCare solution. -- Account Number: The number assigned when the LG ConnectedCare solution is registered.
[Multi Screen] [Ez Setting] [Multi Screen] This feature allows you to view multiple external inputs and videos on a single screen. PIP Mode PBP Mode NOTE •• In multi-screen mode, the DP daisy chain feature is not supported. •• The available number/shape of split screens may vary depending on the model. Selecting Screen Layout When you enter multi-screen mode without having set any screen layout, the screen layout selection menu appears.
Changing Screen Input ENGLISH Press the button on the top right of each split screen to select the desired input. NOTE •• Inputs which have already been selected for other split screens cannot be selected again. To select them, press the RESET button to reset the inputs for all screens first. •• The PIP mode works only when External Input Rotation is set to Off and Screen Rotation is set to Off or 180.
[Office Meeting Mode] [Ez Setting] [Office Meeting Mode] You can set up Quick Functions to use the product in a conference room. •• Office Meeting Mode: Turning on this feature enables you to set functions related to the conference room meeting mode. •• Meeting Guide Screen -- Meeting Guide Screen: Turning on this feature will allow you to use the conference information screen. This feature is for outputting a background image when there is no external input.
ENGLISH General [Language] LAEC(AIO) [General] [Language] You can select the menu language to be displayed on the screen. •• [Menu Language]: Sets the language of your Signage monitor. •• [Keyboard Language]: Sets the language of the keyboard displayed on the screen. [System Information] LAEC(AIO) [General] [System Information] This feature displays information such as the device name, software version, and storage space.
[Power] [General] Power-related feature settings [Power] [No Signal Power Off (15 Min)] Set whether to use the 15 Min Auto Off feature. •• You can set this option to [On] or [Off]. •• If you set this feature to [On], the product turns off after it’s remained in No Signal status for 15 minutes. •• If you set this feature to [Off], the 15 Min Force Off feature is disabled.
[PM Mode] ENGLISH •• [Power Off (Default)]: Set the normal DC off mode. •• [Sustain Aspect Ratio]: The PC retains the Extended Display Identification Data (EDID) even when the power is off. •• [Screen Off]: Switches to [Screen Off] status when entering DPM, Auto Power Off (15 min, 4 hours), or Abnormal Shut Down mode.
[Power Indicator] [Power On/Off History] Display the device's power on/off history. [Network] LAEC(AIO) [General] [Network] [Wired Connection (Ethernet)] •• Wired Connection: Connects the monitor to a local area network (LAN) via the LAN port and configures wired network settings. Only wired network connections are supported. After setting up a physical connection, the display will automatically connect without any adjustments on most networks.
[LAN Daisy Chain] ENGLISH •• LAN Daisy Chain forms a daisy chain of LAN ports so that even if you connect only one monitor set to a network, the other sets in the daisy chain are connected to the network. •• However, the first monitor set in the daisy chain must be connected to the network through a port that is not used for the daisy chain connection. [SoftAP] If you set up a SoftAP, you can connect many devices via a Wi-Fi connection without a wireless router and use wireless Internet.
Tips for Network Settings NOTE •• If you want to access the Internet directly on your display, the INTERNET connection should always be on. •• If you cannot access the Internet, check the network conditions from a PC on your network. •• When you use Network Setting, check the LAN cable or check if DHCP in the router is turned on. •• If you do not complete the network settings, the network may not function correctly. CAUTION •• Do not connect a modular phone cable to the LAN port.
Tips for When Configuring Wireless Network Settings ENGLISH •• The wireless network may be affected by interference from a device that uses 2.4 GHz frequency, such as a wireless telephone, Bluetooth device or microwave. Interference may also be caused by a device that uses 5 GHz frequency such as Wi-Fi devices. •• The wireless network service may run slowly depending on the surrounding wireless environment. •• Some devices may have a network traffic jam if any local home networks are turned on.
[Advanced Setting] [General] [Advanced Setting] [Beacon] •• This option enables BLE Beacon, one of Bluetooth 4.0's features. •• Beacon Mode (On/Off Toggle): enables the Beacon feature. •• The LG Beacon/iBeacon/Eddystone Type Beacon features are supported. •• iBeacon -- Beacon UUID (hex): Set the UUID. 1. Field1: 4byte hex value (8 digits) 2. Field2: 2byte hex value (4 digits) 3. Field3: 2byte hex value (4 digits) 4. Field4: 2byte hex value (4 digits) 5.
NOTE ENGLISH •• Some models do not support background screening services in iOS. •• A reboot is recommended for the settings to be applied properly. •• The UUID value is hexadecimal and the exact number of digits must be entered. •• The distance to Beacon may vary depending on the device. •• The distance to Beacon may vary depending on the application used in the device. •• The Beacon function is affected by radio waves because it employs the Bluetooth Low Energy (BLE) technology.
[Background Image] •• [Booting Logo Image]: Change the logo image that appears when the device boots up. If you set this option to Off, no logo image appears when the device boots up. Download or initialize an image file on the storage device. •• [No Signal Image]: Change the image that appears when there is no signal. If you set this option to Off, no image appears when there is no signal. Download or initialize an image file on the storage device.
[Crestron] ENGLISH (Depending on model) •• This function enables synchronization with applications provided by Crestron. •• Server: This menu sets the server’s IP address for the network connection with the server (equipment provided by Crestron). •• Port (1024~65535): This menu sets the port for the network connection with the server. The default port number is 41794. •• IP ID (3-254): This menu sets a unique ID for synchronizing with the application.
[LED Controller] [USB2 to HDBaseT] This function transfers the data received from the USB2 terminal of the display to HDBaseT. •• [On]: Transfer the data of the device connected to USB2 to the HDBaseT equipment. •• [Off]: Receive the data of the HDBaseT equipment to Signage. NOTE •• The HDBaseT function will be temporarily interrupted when the setting is changed. [Quiet Mode] This mode is used to reduce the noise of the fan. Adjusted to the set fan control and brightness.
ENGLISH Display [Picture Mode] LAEC(AIO) [Display] [Picture Mode] [Mode] This feature enables you to choose the optimal picture mode for your installation environment. •• [Mall/QSR], [Transportation], [Education], [Gov./Corp.]: Display the picture optimally for your installation environment. •• [General]: Display the picture at normal contrast, brightness, and sharpness. •• [Auto Power Save]: Adjust the screen brightness to reduce power consumption.
[Customize] ENGLISH •• [Backlight]: Adjust the brightness of the screen by adjusting the brightness of the backlight. The closer the value is to 100, the brighter the screen is. •• [OLED Light]: Adjusts the brightness of the LED panel to control the brightness of the screen. •• [LED Light]: Adjust screen brightness by tuning the LED Light. Higher values increase brightness. •• [Contrast]: Adjust the difference between the light and dark areas of the picture.
ENGLISH •• [Picture Option]: Customize the picture options. -- [V-Sync]: Control output frame for the installing environment (for some LED models / [Office & School] Picture Mode) -- [Noise Reduction]: Remove randomly popping dots to make the picture look clearer. -- [MPEG Noise Reduction]: Reduce the noise generated in the process of creating a digital video signal. -- [Black Level]: Adjust the brightness and contrast of the screen by adjusting the black level of the screen.
[Aspect Ratio] [Display] [Aspect Ratio] This feature enables you to change the picture size to view the picture at its optimal resolution. •• [Full Wide]: Stretch the picture to fill the screen. •• [Original]: Display the picture at its original resolution.
[Energy Saving] ENGLISH •• [Smart Energy Saving]: Automatically adjust the brightness of the screen according to the brightness of the picture to save energy. -- [On]: Enable the Smart Energy Saving feature. -- [Off]: Disable the Smart Energy Saving feature. •• [Brightness Control]: Adjust the brightness of the screen to save energy. -- [Auto:] Automatically adjust the brightness of the screen according to ambient light. -- [Off]: Disable energy saving.
ENGLISH Sound [Sound Mode] LAEC(AIO) [Sound] [Sound Mode] [Sound Mode] The best sound quality will be selected automatically depending on the video type currently being watched. •• [Standard]: This sound mode works well for content of all types. •• [Cinema]: Optimize sound for watching movies. •• [Clear Voice III] Enhance voices so they can be heard more clearly. •• [Sports]: Optimize sound for watching sports. •• [Music]: Optimize sound for listening to music.
[Sound Out] ENGLISH LAEC(AIO) [Sound] [Sound Out] •• [Internal Speaker] / [External Speaker]: You can output audio either through your Signage monitor's internal speaker or through an external speaker connected to it. -- [Use Speaker Sound]: Enables you to turn the speaker on and off. If you are using an external audio device, turning off this feature allows you to play sound through the external audio device only.
[Audio Out] [Audio Out] [AV Sync Adjustment] LAEC(AIO) [Sound] [AV Sync Adjustment] This feature adjusts audio timing to synchronize video and audio. •• [External Speaker] (0~15): Adjust the sync between video and audio coming from external speakers, such as those connected to the digital audio output port, LG audio equipment, or headphones. The larger the number is, the slower the voice output is than the default value. •• [Internal Speaker] (0~15): Adjust the sync of sound from the internal speakers.
ENGLISH Admin [Lock Mode] LAEC(AIO) [Admin] [Lock Mode] [Home Dashboard Lock] When you set the Home Dashboard Lock, you can limit the change in the settings of the Home Dashboard. [USB Lock] This feature enables you to configure the USB lock feature so that settings or content cannot be changed. [OSD Lock] This feature enables you to configure the OSD lock feature so that settings or content cannot be changed.
[Change Password] This feature enables you to set the password you use to enter the Installation menu. (The default password: 000000) 1 Enter your current password. 2 Enter a new 6-digit password. 3 Enter the same password again in the Confirm Password field for confirmation. [Enterprise Settings] LAEC(AIO) •• Enter your company account code to apply the corresponding enterprise settings.
ENGLISH CONTENT MANAGER Web Login •• Different features are supported depending on the product. This Signage product comes with a feature that enables you to access it on your PC or mobile device. -- Content Manager, Group Manager 2.0, Control Manager, Log Out, Change Password menus are provided. •• URL: https://set ip:3777 •• You can check the initial password in -> [Mobile URL] menu.
[Delete] screen. 2 Select the content you wish to delete. 3 Click [Delete] in the upper right-hand corner of the screen. 4 You can see that the content has been deleted. [Filter / Sort] 1 Click [Filter / Sort] in the upper right-hand corner of the screen. 2 1) Choose your desired sort criterion to sort content files either by file name or in the order they have been played (the most recently played file shown at the top of the list).
[Scheduler] ENGLISH (Scheduler) The Content Manager app's scheduler feature enables certain content to be played at a scheduled time through a playlist or external input. [Creating a Schedule] 1 Click [New Schedule] in the upper right-hand corner of the screen. 2 Choose between [Playlist] and [Input Source]. 3 1) If you have selected [Playlist], select the playlist you wish to schedule the playback of.
[Delete Schedule] Click [DELETE] in the upper right-hand corner of the screen. Select the schedules you wish to delete. Click [DELETE]. Check that the schedules have been deleted. [Calendar View] 1 When you have registered schedules, click [Calendar View]. 2 You can see that the schedules registered are displayed in the form of a timetable. [Distribute] 1 Click [Distribute] in the upper right-hand corner of the screen. 2 Go to the Group Manager app to distribute the created schedules.
Supported Photo & Video Files ENGLISH NOTE •• Subtitles are not supported. •• The photo feature is not supported in OLED model. Supported video codecs Extension .asf, .wmv Codec Video VC-1 Advanced Profile (except for WMVA), VC-1 Simple and Main Profiles Audio WMA Standard (excluding WMA v1/WMA Speech) Video Xvid (excluding 3 warp-point GMC), H.264/AVC, Motion Jpeg, MPEG-4 Audio MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, LPCM, ADPCM, DTS Video H.
Supported Photo File Formats Format .jpeg, .jpg, .jpe JPEG .png PNG .bmp BMP Resolution •• Minimum: Min: 64 x 64 •• Maximum: Normal Type: 15360 (W) x 8640 (H) Progressive Type: 1920 (W) x 1440 (H) •• Minimum: Min: 64 x 64 •• Maximum: 5760 (W) x 5760 (H) •• Minimum: Min: 64 x 64 •• Maximum: 1920 (W) x 1080 (H) Tips for using USB storage devices •• Only USB storage devices are recognized. •• USB storage devices connected to the monitor through a USB hub may not work properly.
ENGLISH •• If your USB storage device has multiple partitions, or if you use a USB multi-card reader, you can use up to four partitions or USB memory devices. •• If a USB storage device is connected to a USB multi-card reader, its volume data may not be detected. •• If the USB storage device does not work properly, remove it and connect it again. •• If the USB storage device is connected in Standby Mode, a specific hard disk will automatically be loaded when the display is turned on.
This feature enables you to group together multiple monitor sets on a single network into the same group and to distribute content (schedules and playlists) or copy setting data on a group basis. This feature has two modes, Master and Slave, and it can access the browser on your PC or mobile device. [Master] •• Add, edit, and delete group. •• Clone your device's settings data. •• Distribute [Schedule] and [Playlists] on a group basis. •• All monitor sets initially come in Master mode.
[GROUP MANAGEMENT] ENGLISH •• Creating a New Group 1. C lick [Add New Group]. 2. E nter a group name. 3. C lick [Add Device], select the devices you wish to add to the group, and add them. 4. C lick [Done], and you will see that a new group has been created. •• Editing a Group 1. C lick the group you wish to edit. 2. A dd a new device by using [Add Device]. 3. D elete a device by using [Delete Device]. 4.
[Setting Data Cloning] [Content Distribute] 1 2 3 4 Select the type of content you wish to distribute (Schedules or Playlists). Select the content you wish to distribute. Select the group to which you wish to distribute the content and click [Distribute]. Run the Content Manager app on the slave sets and check that the content has been distributed. How to Use •• Monitor: Run, add, delete or edit app on the home screen.
ENGLISH ScreenShare LAEC(AIO) This feature allows the screen of a user’s device such as a mobile or PC Windows to be shared with a display using a wireless connection such as WiDi or Miracast. How to Use [ScreenShare] [ScreenShare] 1 Connect according to the instructions provided by the guide that can be accessed through the CONNECTION GUIDE button in the upper right. 2 Once the connection is established, Screen Share between the user device and the monitor is enabled.
LAEC(AIO) This feature is to display the PC (Windows or Mac OS) screen on the Signage monitor with wired/wireless connection to the PC. To use this feature, you need to install LG Presenter PC Client (“Client”) on the PC. You can use LG Presenter in the following ways. -- Connect: Enter the PIN code to connect your Signage device to the Client. -- Screen Share: Share the PC screen of the connected Client with your Signage device.
Connect ENGLISH On Signage [LG Presenter] On PC 1 2 3 4 Go to www.lge.com/LGP to download the Client. Install and run the downloaded Client. Enter the username you want and press the button . Select either auto search or manual search to connect your device. •• Auto search -- When the list of Signage devices found in the network appears, select the one you want to connect to.
Screen Share CAUTION •• if Screen Share does not work or won’t connect to the Signage device, check the firewall settings on your PC. Handover PC1: The PC where the client currently connected to your Signage device is running. PC2: The PC you want to connect to the Signage device connected to PC1. On PC2 1 Run Client program to connect Signage that PC1 is connected to. On PC1 1 When the hand over request pop-up appears on PC2, select whether to approve or deny the request.
ENGLISH MANAGEMENT TOOLS Control Manager Control and check the status of the display through the Web browser. This function is available for PCs and mobile devices. Different features are supported depending on the product. Function •• [Dashboard]: Display a summary of the product's status and provides links to each page. •• [Display & sound]: Provides features such as Screen Brightness, Sound, Input, and Reboot.
LAEC(AIO) AUDIO (RGB/DVI) RS-232C OUT RS-232C OUT RS-232C OUT RS-232C IN RS-232C IN RS-232C IN [Picture ID] is used to change the settings of a specific set (display) using a single IR receiver for multi-vision. Communication is possible between a monitor with an IR receiver and other monitors using RS-232C cables. Each monitor is identified by a Set ID. Setting [Picture ID] allows you to only use the remote control with monitors with a [Set ID] that matches the [Picture ID].
ENGLISH IR CODE •• All models do not support the HDMI/USB function. •• Some key codes may not be supported depending on the model.
Code (Hex) Tile Remarks Remote control button 5B Exit Remote control button 72 Picture ID On (red) Remote control button 71 Picture ID Off (green) Remote control button 63 Yellow Remote control button 61 Blue W.Bal Remote control button Remote control button 5F Function 3F (S.
ENGLISH CONTROLLING MULTIPLE PRODUCTS •• This only applies to certain models. Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC. In the Option menu, the Set ID must be between 1 and 1000 without being duplicated. Connecting cables •• Images may differ according to the model. Connect the RS-232C cable as shown in the picture. The RS-232C protocol is used for communication between the PC and product.
Baud Rate: 9600 BPS Data Length: 8 bits Parity Bit: None Stop Bit: 1 bit Flow Control: None Communication Code: ASCII NOTE •• When using 3-wire connections (non-standard), an IR daisy chain cannot be used. •• Be sure to only use the provided gender to connect properly. •• When you have daisy-chained multiple Signage products to control them simultaneously, if you attempt to turn on/off the master device in a continuous manner, some products may not turn on.
ENGLISH Command Reference List Command Data (Hexadecimal) 1 2 k x k a b c 00 to 02 See Select Input See [Aspect Ratio] 01 02 03 [Power] Select Input [Aspect Ratio] 04 [Brightness Control] j q 00 to 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [Picture Mode] [Contrast] [Brightness] [Sharpness] [Color] [Tint] [Color Temperature] [Balance] [Sound Mode] [Mute on] Volume Control [Current Time] 1 (year/month/day) [Current Time] 2 (hou
Command Data (Hexadecimal) 2 39 [DPM] / [DPM (Standby Mode)] f j 40 41 42 43 44 45 46 47 48 49 Remote Control/Local Key Lock [Power On Delay] Select [Fail Over] Mode Select [Fail Over] Input Remote Control Key Lock Local Key Lock [Status Check] [Daylight Saving Time] [PM Mode] [ISM Method] k f m m t t s s s j 50 [Network Setting] s 51 [Power On Status] Wired [Wake On LAN] / [Wake On LAN (Networked Standby Mode)] t m h i j p o v d n, 0c p n, 80(81) (82) r f w 00 to 01 52 See [DPM] /
Command ENGLISH 1 2 Data (Hexadecimal) 74 [Screen Share Lock] s n, a0 00 to 01 75 [Backup via Storage] s n, a1 See [Backup via Storage] 76 [Digital Audio Input] s n, a2 00 to 01 77 [Booting Logo Image] s n, a3 00 to 01 78 [SoftAP] s n, a4 00 to 01 79 [Natural Size] s n, a5 00 to 64 80 Play Saved Internal Media s n, a8 See Playback of Saved Internal Media 81 [No Signal Image] s n, a9 00 to 01 82 [Audio Out] s n, aa 00 to 02 s n, 0b 00 to 01 d s f f s s
Command [Input Manager] [PC/OPS Power Control] [LED Local Dimming] [Scan Inversion] [Frame Control] [Average Picture Level Auto Control] Read Brightness Value [Screen Fault Detection] [Stereo Mode] [HDR Picture Mode] [Dynamic Tone Mapping] [LED Local Dimming] [USB2 to HDBaseT] [Change Password] [Brightness Range Adjustment] [Color Calibration] [Quiet Mode] 2 n,b1 n,8b n,c1 n,87 n,b7 n,be u z n,c2 n,c4 n,c5 n,c6 n,c3 n,a7 n,ab n,d6 n,c7 * Note Commands may not work when there is no external input used.
ENGLISH Transmission/Reception Protocol Transmission (Command1)(Command2)( )(Set ID)( )(Data)(Cr) * (Command1): This command is used to identify between the adjustment setting or the user adjustment modes. * (Command2): This command is used to control the monitor. * (Set ID): Used for selecting a set you want to control. A unique Set ID can be assigned to each set ranging from 1 to 1000 (01H to 3E8H) under Settings in the OSD menu.
01. [Power] (Command: k a) Transmission (k)(a)( )(Set ID)( )(Data)(Cr) Data 00: [Off] 01: [On] 02: Restart Acknowledgment (a)( )(Set ID)( )(OK/NG)(Data)(x) * The Acknowledgment signal is returned properly only when the monitor is fully powered on. * There may be a delay between the Transmission and Acknowledgment signals. * This feature may not be available for all models. 02. Select Input (Command: x b) Selects an input signal.
06. [Contrast] (Command: k g) ENGLISH Adjusts the screen contrast. 10. [Tint] (Command: k j) Adjusts the screen tints. Transmission (k)(g)( )(Set ID)( )(Data)(Cr) Data 00-64: Contrast 0-100 Transmission (k)(j)( )(Set ID)( )(Data)(Cr) Data 00-64: Tint Red 50-Green 50 Acknowledgment (g)( )(Set ID)( )(OK/NG)(Data)(x) Acknowledgment (j)( )(Set ID)( )(OK/NG)(Data)(x) 07. [Brightness] (Command: k h) Adjusts the screen brightness. 11.
13. [Sound Mode] (Command: d y) Transmission (d)(y)( )(Set ID)( )(Data)(Cr) Data 01: [Standard] 02: [Music] 03: [Cinema] 04: [Sports] 05: [Game] 07: [ News (Clear Voice III)] Acknowledgment (y)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models. 14. [Mute on] (Command: k e) Mutes/unmutes audio. Transmission (k)(e)( )(Set ID)( )(Data)(Cr) Data 00: [ Mute] (Volume off) 01: M ute off (Volume on) 16.
18. [No Signal Power Off(15Min)] (Command: f g) ENGLISH Sets the monitor to enter Automatic Standby mode if there is no signal for 15 minutes. Transmission (f)(g)( )(Set ID)( )(Data)(Cr) Data 00: [Off] 01: [On] Acknowledgment (g)( )(Set ID)( )(OK/NG)(Data)(x) 19. [No IR Power Off] (Command: m n) Activates Auto Power Off when there is no IR signal for 4 hours. 21. [Default] Settings (Command: f k) Executes Reset. (Initialize Screen can only be executed in RGB input mode.
24. Time Elapsed (Command: d l) Transmission (d)(l)( )(Set ID)( )(Data)(Cr) Data FF: R ead status Acknowledgment (l)( )(Set ID)( )(OK/NG)(Data)(x) * The data received is displayed in hexadecimal. 27. [White Balance] Red Gain (Command: j m) Adjusts the red gain value for white balance. Transmission (j)(m)( )(Set ID)( )(Data)(Cr) Data 00-FE: R ed Gain 0-254 FF: C hecks red gain value Acknowledgment (m)( )(Set ID)( )(OK/NG)(Data)(x) 28. [White Balance] Green Gain (Command: j n) 25.
30. [White Balance] Red Offset (Command: s x) ENGLISH Adjusts the red offset value for white balance. Transmission (s)(x)( )(Set ID)( )(Data)(Cr) Data 00-7F: Red Offset 0-127 FF: Checks red offset value Acknowledgment (x)( )(Set ID)( )(OK/NG)(Data)(x) 31. [White Balance] Green Offset (Command: s y) Adjusts the green offset value for white balance.
36. [Tile Mode] Check (Command: d z) Transmission (d)(z)( )(Set ID)( )(Data)(Cr) Data FF: C heck Tile Mode Acknowledgment (z)( )(Set ID)( )(OK/NG)(Data1)(Data2)(Data3)(x) Data1 00: Tile Mode off 01: Tile Mode on Data2 00-0F: Tile column Data3 00-0F: Tile row * This feature may not be available for all models. 37. [Tile ID] (Command: d i) Sets the tile ID value of the product.
42. [Fail Over] Mode (Command: m i) ENGLISH Selects a sound mode. Transmission (m)(i)( )(Set ID)( )(Data)(Cr) Data 00: [Off] 01: [Auto] 02: [User Setting] Acknowledgment (i)( )(Set ID)( )(OK/NG)(Data)(x) 44. Remote Control Key Lock (Command: t p) Configures the settings of the product's remote control key.
46.
48. [PM Mode] (Command: s n, 0c) ENGLISH Sets the PM mode. Transmission (s)(n)( )(Set ID)( )(0c)( )(Data)(Cr) Data 00: [Power Off] (Basic) 01: [Sustain Aspect Ratio] 02: [Screen Off] 03: [Screen Off Always] 04: [Screen Off & Backlight On] 05: [Network Ready] Acknowledgment (n)( )(Set ID)( )(OK/NG)(0c)(Data)(x) * This feature may not be available for all models. 49. [ISM Method] (Command: j p) Selects an ISM method.
51. [Power On Status] (Command: t r) Transmission (t)(r)( )(Set ID)( )(Data)(Cr) Data 00: [ LST(Last Status)] 01: [STD(Standby)] 02: [ PWR(Power On)] Acknowledgment (r)( )(Set ID)( )(OK/NG)(Data)(x) 54. [Time Sync] (Command: s n, 16) Sets Time Sync. Transmission (s)(n)( )(Set ID)( )(1)(6)( )(Data)(Cr) Data 00: [Off] 01: [On] * This feature only works when the monitor is in Master mode. * This feature does not work if the current time is not set.
57. [External Input Rotation] (Command: s n, 85) ENGLISH Sets the External Input Rotation feature. Transmission (s)(n)( )(Set ID)( )(8)(5)( )(Data)(Cr) Data 00: [Off] 01: 90 degrees 02: 270 degrees 03: 180 degrees Acknowledgment (n)( )(Set ID)( )(OK/NG)(8)(5)(Data)(x) * This feature may not be available for all models. 60. [Brightness Scheduling] (Command: s s) Sets Brightness Scheduling. Transmission (s)(s)( )(Set ID)( )(Data1)( )(Data2)( )(Data3)(Cr) Data 1 1.
61.
ENGLISH 65. Stop Video (Command: k x) 69. [Holiday Setting] (Command: s n, 9b) Transmission (k)(x)( )(Set ID)( )(Data)(Cr) Data 00: The Stop Video feature is on. 01: The Stop Video feature is off. * This feature only works in single input mode. Transmission 1. (s)(n)( )(Set ID)( )(9)(b)( ) (Data1)( )(Data2)( )(Data3)( ) (Data4)( )(Data5)( )(Data6)(Cr) 2. (s)(n)( )(Set ID)( )(9)(b)( )(Data1)( )(Data2)(Cr) 3. (s)(n)( )(Set ID)( )(9)(b)( )(Data1)(Cr) 1.
Acknowledgment 1. (n)( )(Set ID)( )(OK/NG)(9)(b) (Data1)(Data2)(Data3)(Data4)(Data5)(Data6)(x) 2. (n)( )(Set ID)( )(OK/NG)(9)(b)(f)(1~7) (Data1)(Data2)(Data3)(Data4)(Data5)(Data6)(x) 3. (n)( )(Set ID)( )(OK/NG)(9)(b)(Data1)(x) * This feature may not be available for all models. 70. [UPnP] (Command: s n, 9c) Sets UPnP mode.
73. [Wi-Fi Lock] (Command: s n, 9f) ENGLISH Sets Wi-Fi Lock. Transmission (s)(n)( )(Set ID)( )(9)(f)( )(Data)(Cr) Data 00: Wi-Fi Unlock 01: Wi-Fi Lock Acknowledgment (n)( )(Set ID)( )(OK/NG)(9)(f)(Data)(x) * This feature may not be available for all models. 74. [Screen Share Lock] (Command: s n, a0) Sets Screen Share Lock.
76. [Digital Audio Input] (Command: s n, a2) Transmission (s)(n)( )(Set ID)( )(a)(2)( )(Data)(Cr) Data 00: Digital 01: Analog Acknowledgment (n)( )(Set ID)( )(OK/NG)(a)(2)(Data)(x) * This feature may not be available for all models. 77. [Booting Logo Image] (Command: s n, a3) Sets Booting Logo Image. Transmission (s)(n)( )(Set ID)( )(a)(3)( )(Data)(Cr) Data 00: [Off] 01: [On] Acknowledgment (n)( )(Set ID)( )(OK/NG)(a)(3)(Data)(x) * This feature may not be available for all models. 79.
82. [Audio Out] (Command: s n, aa) ENGLISH Sets Audio Out to Off/Variable/Fixed. Transmission (s)(n)( )(Set ID)( )(a)(a)( )(Data)(Cr) Data 00: [Off] 01: [Variable] 02: [Fixed] 85. [Apply to all inputs] (Command: s n, 52) Apply the video mode and low value of the current input to the same video value of all inputs. Transmission (s)(n)( )(Set ID)( )(5)(2)( )(Data)(Cr) Data 01: Apply Acknowledgment (n)( )(Set ID)( )(OK/NG)(a)(a)(Data)(x) * This feature may not be available for all models.
* To read or delete a Timer Power On you have set, [Data2] [Data3] must be set to FFH. Example 1: fd 01 f1 ff ff - Reads the 1st index data in Timer Power On. Example 2: fd 01 e1 ff ff - Reads the 1st index data in Timer Power On. Example 3: fd 01 04 02 03 - Sets the Timer Power On as Monday - Saturday 02:03. * This feature only works when Clock 1 (year/month/day) and Clock 2 (hour/minute/second) have been set. Acknowledgment (d)( )(Set ID)( )(OK/NG)(Data1)(Data2)(Data3)(x) 87.
88. LCIN008 Control (Command: s n, b8) ENGLISH It controls the LCIN008 device. Transmission (s)(n)( )(Set ID)( )(b)(8)( )(Data1)(Data2)(Cr) Data 1 00: LCIN008 Power 01: LCIN008 Brightness Data 2 1. For Power 0 x 00: Off 0 x 01: On 2. For Brightness 0 x ff: Read 0 x 00 ~ 0 x 64: Applies a set value Acknowledgement (n)( )(Set ID)( )(OK/NG)(b)(8)(Data1)(Data2)(x) * This feature may not be available for all models. * Other commands do not work for a certain time after applying. 91.
94. [UHD Deep Color] (Command: s n, af) Transmission (s)(n)( )(Set ID)( )(a)(f)( )(Data1)( )(Data2)(Cr) Data1 70: DVI-D 90: HDMI1 91: HDMI2 92: OPS/HDMI3/DVI-D 95: OPS/DVI-D 96: HDMI3/DVI-D 97: HDMI3/HDMI2/DVI-D 98: OPS 99: HDMI2/OPS C0: DISPLAYPORT C1: DISPLAYPORT/USB-C C2: HDMI3 C3: HDBaseT Data2 00: [Off] 01: [On] Acknowledgment (n)( )(Set ID)( )(OK/NG)(a)(f)(Data1)(Data2)(x) * This feature may not be available for all models. 95. [Sync Mode] (Command: s n, b0) Sets Sync Mode. 96.
99. [Scan Inversion] (Command: s n, 87) ENGLISH It controls the on/off status of Scan Inversion. Transmission (s)(n)( )(Set ID)( )(8)(7)( )(Data)(Cr) Data 00: Off 01: On Acknowledgment (n)( )(Set ID)( )(OK/NG)(8)(7)(Data)(x) * This feature may not be available for all models. * If you change the values on a Video Wall model, please reboot for it to work normally. 100. [Frame Control] (Command: s n, b7) It controls the Frame Control.
108. [USB2 to HDBaseT] (Command: s n, c3) Sets USB2 to HDBaseT. Transmission (s)(n)( )(Set ID)( )(c)(4)( )(Data)(Cr) Data 00: Mall/QSR 01: General 02: Gov./Corp. 04: Education Transmission (s)(n)( )(Set ID)( )(c)(3)( )(Data)(Cr) Data 00: [Off] 01: [On] Acknowledgment (n)( )(Set ID)( )(OK/NG)(c)(4)(Data)(x) * Depending on the model, some picture modes may not be supported. * It works only when the HDR content is running.
ENGLISH 111. [Color Calibration] (Command: s n, d6) Selects Color Calibration. Transmission (s)(n)( )(Set ID)( )(d)(6)( )(Data)(Cr) Data 00: Off 01: On Acknowledgement (n)( )(Set ID)( )(OK/NG)(d)(6)(Data)(x) * It may not be supported depending on the model. 112. [Quiet Mode] (Command: s n, c7) Selects Quiet Mode. Transmission (s)(n)( )(Set ID)( )(c)(7)( )(Data)(Cr) Data 00: Off 01: On Acknowledgement (n)( )(Set ID)( )(OK/NG)(c)(7)(Data)(x) * It may not be supported depending on the model.
