MOSCOW_LAB-M7500(ENG)_19B Car CD/Cassette Combo Receiver OWNER'S MANUAL MODEL : LAB-M7500 Before connecting, operating please read this instruction The working life of this adjusting this product, booklet carefully and completely. or product is 7 years since the date of purchase.
Table of Contents INTRODUCTION OPERATION TableofContents.................................2-3 BasicOperation................................14-15 SafetyPrecautions.................................4 Turningtheuniton..............................14 BeforeUse......................................5-7 Turningtheunitoff..............................14 SymbolUsedinthisManual........................5 Selectingasource..............................14 NotesonDiscs.................................
Table of Contents RadioOperation................................16-17 REFERENCE Listeningtheradiostations.......................16 16 Storing and recalling broadcast frequencies AutoSearchMemory............................17 18-19 Operation with Audio CD, MP3 Disc and CD changer Troubleshooting..................................22 Specifications....................................23 . . . . . . . . . . . . . . . . PlayinganAudioCDandMP3Disc.................18 PlayingaCDchanger(OPTIONAL)..
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Warning: cover or parts To reduce the risk of electric back of this inside. Refer Warning: product. There are servicing to qualified To reduce the risk of fire expose this moisture. shock, do product to dripping or no not remove the user-serviceable service personnel.
Before Use To ensure manual proper carefully Symbol use of this product, please read this owner's Notes Handling lightning flash symbol alerts you to the presence of dangerous voltage within the product enclosure that may a other material likely damage. to cause harm to the unit itself NOTE notes and operating features. TIP Indicates tips edges so paper or that tape playback side of the disc. Hold the fingerprints do not get on the surface.
Before Use Use and Installing Pull the pencil minus of the remote control care the tray Using Point the remote control in the direction of the front battery outward on the back of the remote control with point pen and insert the battery with (-) poles pointing in the proper direction.
Before Use Protecting your unit from theft The front the panel can be detached from the head unit protective case provided to discourage theft. 1. Press RELEASE to open the front the front Attaching panel and stored in D panel. C B A RELEASE 2. Push the front 3. Pull the front to panel panel. ( ) right. 1. Join A on the front 2. Join C on the front the front 3. panel to B on the main unit. panel to D on the main unit while panel to left.
Front Panel 1 2 3 4 19 18 1 MUTE button 2 RELEASE 3 4 5 ( 6 17 161514 7 13 12 12 ) button ? VOLUME KNOB 13 ? CONTROL UP/DOWN dial 14 15 REMOTE SENCER 910 ? MP3 TRACK +10 ? MP3 TRACK -10 17 POWER button 7 SELECTION 18 BAND button 9 10 XDSS button (AMS) button CD SKIP/SEARCH(./>) button TAPE REWIND/FAST FORWARD (.
Remote Control 1 ? - POWER/MUTE ? ( ) - Switches the unit ON - - Press to mute the 6 2 FUNCTION Selects 2 3 ? - ? - - 3 - ? - ? - 4 7 ? - a (FUNC.) - function. ? 0-9 number buttons Preset Station buttons (1-6) (B/X) Starts playback. Pauses playback temporarily. Reverse playback (TAPE). or of go to track. Select the desired frequency DISC SELECTOR (D-/D+) 4 ? MP3 Track -10/+10 ? BAND - button the first 10 seconds of all track.
Installation Basic Installation Bend the claws Before and 1. make installing, remove sure that the the terminal of the Remove the existing car ignition-switch is set to OFF battery to avoid short-circuiting. receiver unit. 3. Install the installation sleeve. 4. Install the unit in to the installation sleeve. already dashboard, it When receiver unit installation sleeve for the receiver unit in the an must be removed.
Installation ISO-DIN Installation 1. Slide the unit into ISO-DIN frame. 2. Install 3. Slide the unit and frame into dash 4. Install dash 5. Install trim 6. Install screws removed from old unit. panel ring or opening. PREATION adapter plate. to the unit. faceplate by fitting right edge pushing left edge closed.
Connections Connecting Before to Car make connecting, sure that ignition switch is set to OFF, and remove the terminal of the battery to avoid short circuits.
Connections to Car Connecting Connecting From antenna - to Connect the AUDIO OUTPUT connector of this unit to the AUDIO INPUT connector of To the wiring 1. BLACK of vehicle Colors of leads Auxiliary Equipment. This lead is for connection to the Ground. : 2. ORANGE (OPTIONAL) Auxiliary Equipment : PREATION This lead is for connection to the Dimmer line. + + 3. RED This lead is for connection to the terminal from : which the power is supplied when the switch is set to ACC. 4.
Basic Turning the unit Press POWER or POWER/MUTE ( Turning Operation any other button ) on the volume Adjusting on on the front panel Use VOLUME to or the remote control to turn the unit on. the sound level. adjust Rotate VOLUME KNOB on the front panel to increase or decrease the volume. Press VOLUME the unit off ( / ) on the remote control to increase or decrease the volume. ? Press POWER ? Press POWER/MUTE on the front ( ) panel to turn the unit off.
Basic SOUND Using The SELECTION Adjustment the EQ Turn (Equalizer) lets you adjust the equalization to match acoustic characteristics as desired. equalizer There 7 stored are equalizer which you curves can car easily interior recall at any time. Here is a list of the equalizer curves: ? EQ POP Reproduces the acoustics of pop music. CLASSIC : Reproduces the acoustics of orchestral ROCK : Reproduces the acoustics of rock music. JAZZ : Reproduces the acoustics of jazz music.
Radio the radio stations Listening 1. Press POWER/MUTE to turn the unit - Operation ) [POWER on the front panel] button on. When you select 2. Press FUNC. ( Storing or You can easily the unit is turned a source a seek displayed, FM1, 3. tuning, pressing the TUNE(-/+) or . m / M > for more 1 second. - The tuner will enough - You for can frequencies until good reception is found. scan the a broadcast or . tuning by pressing either the m / M > with quick presses. 5.
Radio Auto Search To Memory This function lets you automatically store the six broadcast frequencies. scan the preset stations Press AS/PS button strongest To ? Press BAND button to select the tuner. ? Press FUNC. button to select the tuner. - The on the front panel. preset stations Press BAND to select the desired band and press the desired number buttons (1-6) on the remote control. The number of the 2. Press AS/PS button on stop the scanning, press AS/PS button. To tune in the 1.
Operation Playing an with Audio CD, MP3 Disc and CD changer Audio CD and MP3 Disc Pause MP3 CD The unit CDC 1. Press PLAY/PAUSE MP3 formatted play can MP3 CD recordings on CD-ROM, CD-R or 2. To return to (B/X) during playback. playback, press PLAY/PAUSE (B/X) again. CD-RW discs. Before playing Recordings on To MP3 recordings, read the notes on Moving MP3 page 21. press NUMBER (#) button and then press the track number with 0-9 number buttons.
Operation with Audio CD, MP3 Disc and CD changer MP3 TRACK -10/+10 Repeat 1. a. Press RPT during playback. CD MP3 The "RPT" appears in the display window. (It is played repeatedly the whole music within b. Press and hold RPT press the -10 (-D) button to go back to the previous 10th track, and press +10 button to go forward to the next 10th track. Durning playback, CDC disc) Intro CDC during playback. The "DRT" appears in the display window.
TAPE Basic Playback 1. the front Open 2. Insert a Operation Auto Music Search panel by pressing cassette RELEASE ( ) tape with the exposed tape side button. to the being received, the cassette or tape plays automatically. with a 1. Press the AMS button during playing. "AMS-P" indicator will be shown in the For your reference To play the TAPE during other function press TAPE button. (The TAPE is (CD or RADIO) operation, played automatically.) display window. 2.
Additional information Notes on MP3 5. A Recordings there is About MP3 An MP3 file is audio data compressed by using audio layer-3 file-coding scheme. ".mp3" file extension "MP3 files". The unit than can not read an the MPEG1 We call files that have the MP3 file that has a 2. 3. 4. no with this unit is limited as track, it cannot playback MP3 playback MP3 files, format all the data in the 6.
Troubleshooting Cause Symptom Power doesn't turn on. The unit doesn't Leads and connector are Correction incorrectly connected. The fuse is blown. Confirm Rectify once more the reason the fuse. Be very the same rate. operate. Noise and other factors to microprocessor The unit does not operate correctly when the even appropriate causing the operate incorrectly. are Battery power is low. Some operations are prohibited built-in for the fuse sure battery. using another on.
Specifications General OutputPower..............................................................................50Wx4CH(Max.) PowerSource......................................................................................DC12V Speakerimpedance.....................................................................................4Ω GroundSystem.................................................................................Negativetype Dimensions(WxHxD)....................................................
P/NO : 3834RR0019B
