LAB-M7500(ENG)_19F Car CD/Cassette Combo Receiver OWNER'S MANUAL MODEL : LAB-M7500 Before connecting, operating please read this instruction booklet or adjusting this product, carefully and completely.
Table of Contents INTRODUCTION TableofContents..................................2 SafetyPrecautions.................................3 BeforeUse......................................4-6 FrontPanel.......................................7 RemoteControl....................................8 PREPARATION Installation.......................................9 Connections...................................10-11 OPERATION BasicOperation................................12-13 Turningtheuniton..........................
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Warning: cover or To reduce the risk of electric back of this parts inside. Refer Warning: To reduce the risk of fire expose this moisture. shock, do product. There are servicing to qualified product to dripping or or no not remove the user-serviceable service electric personnel.
Before Use To ensure manual proper carefully Symbol use of this product, please read this owner's Notes Handling Discs The lightning flash symbol alerts you to the presence of dangerous voltage within the product enclosure that may a Discs Do not touch the Used in this Manual constitute on and retain for future reference. edges so paper or that tape playback side of the disc. Hold the fingerprints do not get on the surface. on Indicates hazards likely damage.
Before Use Use and Installing Pull the pencil minus of the remote control care the Using battery tray outward on the back of the remote control with point pen and insert the battery with (-) poles pointing in the proper direction. or the remote control Point the remote control in the direction of the front ball the a plus (+) panel to operate.
Before Use Protecting your unit from theft The front the panel can be detached from the head unit protective case provided to discourage theft. 1. Press RELEASE to open the front the front Attaching panel and stored in D panel. C B A RELEASE 2. Push the front 3. Pull the front panel panel. to ( ) right. 1. Join A 2. Join C on the front panel to B on the main unit. on the front panel to D on the main unit while the front 3. panel to left.
Front Panel 1 2 3 4 19 18 1 MUTE button 2 RELEASE 3 ( 6 17 16 15 7 14 13 12 12 ) button 8 ? MP3 TRACK +10 ? MP3 TRACK -10 13 SHUFFLE ? CONTROL UP/DOWN dial 14 REPEAT 5 CD/CDC(OPTIONAL) 6 DISPLAY WINDOW 7 SELECTION 8 EQUALIZER 9 XDSS button 15 button (SEL) (EQ) button (AMS) button CD SKIP/SEARCH(./>) button TAPE REWIND/FAST FORWARD (.
Remote Control 1 ? - POWER/MUTE ? ( ) - Switches the unit ON - - Press to mute the 2 FUNCTION Selects 2 3 ? - ? - - 3 - ? - ? - 7 4 ? - a (FUNC.) previous button - function. ? 0-9 number buttons (1-6) ( B/X) Starts playback. Pauses playback temporarily. Reverse playback (TAPE). ? 4 ? - - the first 10 seconds of all track. 5 REPEAT (RPT) Plays tracks repeatedly. ? - ? SHF Plays - or of go to track.
Installation Basic Installation Before make installing, the terminal of the Bend the claws sure that the battery car to ignition-switch avoid short-circuiting. 1. Remove the 2. Make the necessary connections. 3. Install the installation sleeve. 4. Install the unit in to the installation sleeve. existing Removing existing If there is already remove to the thickness of the dashboard receiver unit.
Connections Connecting Before to Car make connecting, sure that ignition switch is set to OFF, and remove the terminal of the battery to avoid short circuits.
Connections to Car Connecting Connecting From antenna - to Connect the AUDIO OUTPUT connector of this unit to the AUDIO INPUT connector of To the wiring 1. BLACK of vehicle Colors of leads Auxiliary Equipment. This lead is for connection to the Ground. : 2. ORANGE (OPTIONAL) Auxiliary Equipment : PREATION This lead is for connection to the Dimmer line. + + 3. RED This lead is for connection to the terminal from : which the power is supplied when the switch is set to ACC. 4.
Basic Turning the unit Press POWER POWER/MUTE Turning or Operation Adjusting on any other button ( ) on on the front panel Use VOLUME to or the remote control to turn the unit the volume on. the sound level. adjust Rotate VOLUME KNOB on the front panel to increase or decrease the volume. Press VOLUME the unit off ( / ) on the remote control to increase or decrease the volume. ? Press POWER ? Press POWER/MUTE on the front ( ) panel to turn the unit off.
Basic SOUND Using SELECTION Adjustment the EQ Turn (Equalizer) The equalizer lets you adjust the equalization to match acoustic characteristics as desired. There 7 stored are equalizer which you curves can car easily interior recall at any time. Here is ? ? a list of the EQ POP equalizer curves: Reproduces the acoustics of pop music. EQ CLASSIC : Reproduces the acoustics of orchestral music. : ? EQ ROCK ? EQ JAZZ Reproduces the acoustics of rock music.
Radio Listening to turn the unit ( ) [POWER on the front panel] button on. When you select 2. Press FUNC. the unit is turned a source on. a displayed, FM1, FM2, FM3, MW(AM). perform seek tuning, pressing the TUNE(-/+) or 5. performed if there is no station to be presetting is performed, the previous preset stations are automatically erased. ?T o stop the automatic presetting, press BAND or AS/PS You a broadcast strong indicator will 3.
Operation Playing an CD with Audio CD, MP3 Disc and CD changer Audio CD and MP3 Disc Pause MP3 The unit MP3 CDC 1. Press PLAY/PAUSE MP3 formatted play can CD recordings on CD-ROM, CD-R or 2. To return to (B/X) during playback. playback, press PLAY/PAUSE ( B /X) again. CD-RW discs. Before playing Recordings on MP3 recordings, read the notes on Moving MP3 page 19. Press the .
Operation with Audio CD, MP3 Disc and CD changer MP3 TRACK -10/+10 Repeat 1. a. Press RPT during playback. CD MP3 The "RPT" appears in the display window. (It is played repeatedly the whole music within b. Press and hold RPT Durning playback, press the -10 (-D) button to go back to the previous 10th track, and press +10 button to go forward to the next 10th track. CDC disc) Intro CDC during playback. The "DRT" appears in the display window.
TAPE Basic Playback 1. the front Open 2. Insert a Operation panel by pressing cassette RELEASE ( ) tape with the exposed tape side button. to the being received, the cassette (AMS) This unit is function that allows you to sip forward of a particular selection on the or right. If radio broadcast is Auto Music Search tape plays equipped with a backward to locate the beginning tape. 1. Press the AMS button during playing. automatically.
Troubleshooting Cause Symptom Power doesn't turn on. The unit doesn't Leads and connector are Correction incorrectly connected. The fuse is blown. Confirm Rectify once more the reason the fuse. Be very the same rate. operate. Noise and other factors to microprocessor The unit does not operate correctly when the even appropriate causing the operate incorrectly. are Battery power is low. operations are prohibited Some built-in sure battery. using another on. new Check disc.
Specifications MP3 Disc compatibility with this unit is limited General as OutputPower........................50Wx4CH(Max.) follows: 1. 2. 3. 4. / 22.05 48kHz Sampling Frequency (MP3), Bit rate / within 16 320kbps (include VBR) (MP3), CD-R/CD-RW physical format should be "ISO 9660" If you record MP3 files using the software which cannot create a FILE SYSTEM, for example "Direct-CD" etc., it is impossible to playback MP3 files. We recommend that you use "Easy-CD - - Creator" which creates 5.
P/NO : 3834RR0019F
