PREMTC00U Installation Manual

OPERATION INSTRUCTIONS - Standard Operation
11
ENGLISH
10
OPERATION INSTRUCTIONS - Standard Operation
ENGLISH
NOTE
!
• Power cooling quickly lowers the
indoor temperature.
- Desired temperature: 64°F(18°C)
- Fan speed : Power fan speed
- Fan direction: Current fan direction
• If fan speed or desired temperature is
changed, the power cooling is cleared,
and it operates in the cooling operation
mode.
• This function may not be supported,
depending on the models.
NOTE
!
• In dehumidification/fan mode
- You cannot adjust set temperatures.
- The menu items of fan speed might
not be partially selected depending
on the product functions.
• Using dehumidification mode in rainy
season or high humidity climates, you
can feel dehumidification and cooling
mode at the same time.
• Fan mode only circulates the indoor air
without changing the room
temperature.
1 Press button until ’Po’ is displayed.
1 Press button repeatedly to adjust the
fan speed.
SLO LO MED HI
AUTO
POW
h Some fan speed may not operate
depending on the product.
h AUTO fan speed
- It is displayed as an animation effect like
below.
You can simply adjust desired fan speed.
1 Press button to change fan speed.
This function automatically manages room
temperature based on two types of set
temperature(cooling and heating) and provides
a comfortable environment.
Power cooling
Cooling operation state
1 Press button to select auto
mode(Dual set points control).
2 Press buttons and then cooling and
heating temperature will blink.
3 You can control the blinking temperature
by pressing bottons.
h If you want to control each temperature,
press botton when temperature icons
blink.
Fan speed Auto operation (Dual set points)
Fan
Dehumidification