User's Guide L2000C L2000CN L2000CE Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for future reference. See the label attached on the product and dealer when you ask for service.
This unit has been engineered and manufactured to ensure your personal safety, improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. however On Use Safety only the cord, make power cord supplied with the unit.
On Installation Do not allow anything to rest upon or roll over the power cord, and do not the display where the power cord is subject to damage. Do not use this display sink, laundry tub, in near water a wet such basement, as near a or near a place bathtub, washbowl, kitchen swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation.
Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Connecting the stand 1. Place the monitor with its front 2. Align 3. base the hooks on facing Removing the stand or downward the stand base with the on a matching cushion or base soft cloth. slots in the base of the monitor. Insert the hooks into slots.
Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display 1. Adjust the position Tilt Range : of the panel in various ways for maximum comfort. -5˚~25˚ Height Range : Swivel :350˚ maximum 3.15 inch (80.00mm) 80.0mm First, remove the locking pin. Landscape & Portrait : You can rotate (* For detailed information, please refer * Make sure the panel 90 clockwise.
the Connecting Display Using the Computer 1. Place the monitor in a convenient, well-ventilated location near your computer. To height of your monitor, unlock the stand lock on top of the stand. 2. Connect the signal cable. When attached, tighten the thumbscrews to connection. 1 Connect the power cord into 3. to the display.
Control Panel Functions Front Panel Controls Control Function MENU Button Use this button to enter or exit the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear.
Control Panel Functions Control Function AUTO/SET Use this button to enter Button Display. a selection in the On Screen AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO/SET button before entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode).
On Screen Screen Display (OSD) Control Adjustment Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD.
On Screen The and Display(OSD) Selection and Adjustment following table indicates all the On Screen Display control, adjustment, setting menus.
On Screen Selection and Display(OSD) Adjustment were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. You Press the MENU Menu Name Button, then the main menu of the OSD appears.
On Screen Selection and Display(OSD) Main menu Sub Adjustment Description menu PICTURE PICTURE of the BRIGHTNESS To adjust the CONTRAST To adjust the contrast of the GAMMA Set your own gamma value. : -50/0/50 On the monitor, high gamma values display whitish images and low gamma values display high contrast images. brightness screen. screen.
On Screen Display(OSD) Main Selection and Sub menu Adjustment Description menu TRACKING TRACKING CLOCK To minimize any vertical bars or stripes visible on the screen background.The horizontal screen size will also change. PHASE To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters.
On Screen A A A Display(OSD) The OSD screen Selection and Adjustment will appear when you touch the (-) button on the right of the monitor. Menu Name Icons Sub-menu Name FLATRON F-ENGINE Screen when applied Screen when not applied When you execute F-ENGINE, two tones will appear on the screen as shown. The applied screen will appear on the left side, whereas the non-applied will appear on the right side.Touch the SET button to use the adjusted screen.
Troubleshooting Check the No following before calling for service. image appears Is the power cord of the display connected? Check and Is the power indicator light on? Press the Power button. Is the power on and the power indicator blue or Adjust the brightness properly see if the power cord is connected to the power outlet. and the contrast.
Troubleshooting Display image Display is incorrect Position is incorrect. Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution.
Troubleshooting Have you installed the Have you installed the display driver? driver? display Be sure to install the driver CD display your display. Or, you driver from Do you Make see an "Unrecognized monitor, display driver from the (or diskette) that comes with sure Plug&Play our also download the can web site: http://www.lge.com. to check if the video card supports function.
Specifications L2000C/L2000CN Display 20.1 inches (51.0cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 20.1 inches viewable 0.255mm pixel pitch Sync Input Horizontal Freq. Analog : 28 83kHz (Automatic) Digital : 28 83kHz (Automatic) - - Vertical Input 56 Freq. Form - 75Hz (Automatic) Separate TTL, Positive/Negative SOG (Sync On Green) Digital Video Input pin D-Sub Connector 15 Signal Input DVI D connector (Digital) RGB Analog (0.
Specifications L2000CE Display 20.1 inches (51.0cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 20.1 inches viewable 0.291mm pixel pitch Sync Input Horizontal Freq. Analog : 28 83kHz (Automatic) Digital : 28 83kHz (Automatic) - - Vertical Input Video Input 56 Freq. Form - Separate TTL, Positive/Negative SOG (Sync On Green) Digital pin D-Sub Connector D connector (Digital) RGB Analog (0.
Specifications ), Detached ( O ) Stand Base Attached( Signal cable Attached( O ), Detached ( Power cord Wall-outlet type or ) PC-outlet type NOTE Information in this document is subject to change without A19 notice.
Preset Modes (Resolution) L2000C/L2000CN monitor 1 640 x 350 31.47 70.09 2 640 x 480 31.47 59.94 3 640 x 480 37.50 75 4 720 x 400 31.47 70.08 5 800 x 600 37.88 60.32 6 800 x 600 46.88 75 7 832 x 624 49.72 74.55 8 1024 x 768 48.36 60 9 1024 x 768 60.02 75.03 10 1152 x 870 68.68 75.06 11 1152 x 900 61.80 65.96 12 1280 x 1024 63.98 60.02 13 1280 x 1024 79.98 75.02 *14 1600 x 1200 75.0 60 **15 1600 x 1200 75.
Specifications Indicator MODE LED Color On Mode Blue Sleep Mode Amber Off Mode Off Signal Connector 1 8 9 16 17 24 Pin Assignment DVI-D Connector Pin Pin Signal(DVI-D) Signal(DVI-D) 1 T. M. D. S. Data2- 16 Hot 2 T. M. D. S. Data2+ 17 T. M. D. S. Data0- 3 T. M. D. S. Data2/4 Shield 18 T. M. D. S. Data0+ 4 T. M. D. S. Data4- 19 T. M. D. S. Data0/5 Shield 5 T. M. D. S. Data4+ 20 T. M. D. S. Data5- 6 DDC Clock 21 T. M. D. S. Data5+ 7 DDC Data 22 T. M. D. S.
How to Install the VESA Standard wall This monitor meets mounting VESA-compliant mounting interface pad specifications. VESA wall mounting Connected to another object (stand type and wall- mounted type. This monitor accepts a VESAcompliant mounting interface pad.- This has to be purchased separately if required) For further information, refer to the VESA Mounting Instruction Guide.
Digitally yours
