ENGLISH DEUTSCH FRANÇAIS NEDERLANDS SLOVENŠČINA PORTUGUÊS MODEL HT965DF (HT965DF, SH95DF-F/ W) ΕΛΛΗΝΙΚΑ Please read this manual carefully before operating your set and retain it for future reference. ESPAÑOL DVD Receiver System ITALIANO OWNER’S MANUAL P/NO : MFL63284226 HT965DF-DH_BDEULL_ENG_4226.
1 Safety Information Safety Information 1 Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USERSERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Safety Information 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4.
Contents Contents 1 Safety Information 2 2 CAUTION SCART jack 20 Resolution Setting 20 Video Output Resolution 21 Optional Equipment Connection 21 HDMI IN connection 22 AUX IN Connection 22 AUDIO (PORT.
Contents 32 Screen Saver 32 Starting play from selected time 32 Resume playback 33 Marked Playback 33 Changing subtitle code page 34 Viewing a PHOTO file 34 Troubleshooting 44 Troubleshooting 1 Appendix 45 Language Codes Options while viewing a photo 46 Area Codes 35 Sleep Timer Setting 47 Trademarks and Licenses 35 Dimmer 35 Turn off the sound temporarily 48 Specifications 35 Last Scene Memory 35 System Select - Optional 35 Adjust the speaker level settings 36 36 Radi
Preparation 2 Preparation 2 Preparation Unique Features Accessories Portable In Please check and identify the supplied accessories. Listens to music from your portable device. (MP3, Notebook, etc) USB Direct Recording Records music from CD to your USB device. RCA to SCART cable (1) Speaker cables (3) Remote control (1) Batteries (2) Full HD up-scaling Views Full HD picture quality with simple setup. Home Theater Speaker ez Setup listens sound from TV, DVD and Digital device with vivid 5.
Preparation Playable Discs This unit plays DVD±R/RW and CD-R/RW that contains audio titles, DivX, MP3, WMA and/or JPEG files. Some DVD±RW/DVD±R or CDRW/CD-R cannot be played on this unit due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software. DVD-VIDEO (8 cm / 12 cm disc) Discs such as movies that can be purchased or rented.
Preparation Playable file Requirement DivX file compatibility with this unit is limited as follows : • Available resolution: within 720x576 (W x H) pixels. • The file name of the DivX subtitle should be entered within 45 characters. • If there is impossible code to express in the DivX file, it may be displayed as " _ " mark on the display. • Frame rate : less than 30 fps. • If the video and audio structure of recorded files is not interleaved, either video or audio is outputted.
Preparation Remote control t RADIO&INPUT: Changes input sources. • • • • • • • • • • b • • • • • • • • • 0 to 9 numerical buttons : Selects numbered options in a menu. OPEN / CLOSE a RADIO & INPUT s REPEAT : Selects a play mode. (Repeat/ Random) • • • • • • • • • • c • • • • • • • • • b CLEAR ./> SKIP : Goes to next or previous chapter/ track/ file. REPEAT SKIP c SCAN m/M SCAN : Searchs backward or forward.
Preparation TUNING -/+ : Tunes in the desired radio station. Remote control OPEN / CLOSE a RADIO & INPUT ENTER : Acknowledges menu selection. Presetting the radio stations. O RETURN : Moves backwards in the menu or exits the setup menu. TITLE : If the current DVD title has a menu, the title menu appears on the screen. Otherwise, the disc menu may not appear. b 2 CLEAR Preparation SKIP c REPEAT SCAN DISC MENU : Accesses the menu on a DVD disc.
Preparation 11 Front panel b c d e 2 Preparation a l k ji h g f a 1/\ (POWER) Switches the unit ON or OFF. i x (STOP) Stops playback. b Disc Tray j N/X (PLAY / PAUSE) Starts playback. Pause playback temporarily, press again to exit pause mode. c iPod Dock d Display window Shows the current status of the unit. e Z (OPEN/CLOSE) Opens or closes the disc tray. f VOLUME Adjusts speaker volume. k USB Port Connect a USB device. l PORT. IN Connect to a portable player with audio outputs.
Preparation Rear panel a b c de 2 Preparation ji a Power cord b Speakers connectors Connect the speaker cables. c Cooling Fan d Antenna Connector FM- Connects the FM wired antenna e VIDEO OUT Connect to a TV with video inputs. h g f f HDMI OUT (Version 1.2A) Connect to TV with HDMI inputs. (Interface for digital audio and video) g HDMI IN (Version 1.2A) 1/2 Connect to an external source with HDMI output. h OPTICAL IN Connect to optical audio equipment.
Installation 13 3 Installation Assembling the speaker stand to the speaker 1. Insert a speaker wire from the bottom of the base. Step 1 Installation 3 Preparation Cable Base Speaker HT965DF-DH_BDEULL_ENG_4226.
Installation 2. Draw the speaker wire through the inside of the pole and also through the hole on the bottom of the speaker. Step 2 4. Connect the speaker wire to the terminal on the speaker. Make sure the wire marked black goes in to the terminal marked “–” (minus) and the other wire goes in to the terminal marked “+” (plus). Step 4 3 Installation 3. Attach the speaker to the pole, the secure the connection with a supplied screw. Step 3 CAUTION Be careful that the speaker should not fall down.
Installation Mounting the speakers to a wall 15 3. Hang the speaker bracket onto the wall bracket. Step 3 You can mount the speakers to a wall. Prepare screws and brackets supplied. 1. Attach the wall bracket to the wall with screws as shown in the illustration below. When you mount to a wall (concrete) use the wall plugs. Screw length 3.5 mm (0.14 inch) 4. Press the speaker to secure the brackets. Step 4 25 mm (0.98 inch) Installation 3 Step 1 Wall plug Screw 2.
Installation Attaching the speakers to the unit 1. Connect the wires to the unit. Match each wire’s colored band to the same colored connection terminal on the rear of the unit. To connect the cable to the unit, press each plastic finger pad to open the connection terminal. Insert the wire and release the finger pad.
Installation Connections to Your TV Component Video Connection Make one of the following connections, depending on the capabilities of your existing equipment. You can hear the sound through the system’s speakers. 17 Connect the COMPONENT VIDEO OUTPUT (PROGRESSIVE SCAN) jacks on the unit to the corresponding input jacks on the TV using component cables. Component Connection NOTE • Depending on your TV and other equipment you wish to connect, there are various ways you could connect the unit.
Installation HDMI Out Connection If you have a HDMI TV or monitor, you can connect it to this unit using a HDMI cable. Connect the HDMI OUT jack on the unit to the HDMI IN jack on a HDMI compatible TV or monitor. Set the TV’s source to HDMI (refer to TV’s Owner’s manual). HDMI Connection 3 NOTE • If a connected HDMI device does not accept the audio output of the unit, the HDMI device ’s audio sound may be distorted or may not output.
Installation Video Connection Connect the VIDEO OUT jack on the unit to the video in jack on the TV using a video cable. You can hear the sound through the system’s speakers. 19 To connect to a TV with the SCART jack Connect the RCA to SCART cable form the VIDEO OUT on the rear of the unit to the SCART jack on your TV. RCA to SCART Video Connection Unit Unit Installation 3 TV TV Yellow HT965DF-DH_BDEULL_ENG_4226.
Installation Resolution Setting The unit provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu. 1. Press HOME. 2. Use I/i to select the [Setup] and press ENTER. The [Setup] menu appears. Video Output Resolution Displayed resolution in display window and outputted resolution may different according to connection type.
Installation HDMI IN connection You can enjoy the pictures and sound of your component with this connection. Connect the HDMI IN 1 or HDMI IN 2 jack on the unit to the HDMI output jack on your SetTop box (or Digital Device etc.) using an HDMI cable. Set the external source to HDMI IN 1 or HDMI IN 2 by pressing t RADIO&INPUT. HDMI IN Connection NOTE • You cannot change the video resolution at the HDMI IN 1 or HDMI IN 2 mode. Change the video resolution of the connected component.
Installation AUX IN Connection Connect an Output of auxiliary device to the AUX (L/R) INPUT Connector. AUX IN Connection AUDIO (PORT. IN) In Connection Connect an output of portable device (MP3 or PMP etc) to the AUDIO (PORT. IN) input connector. PORT.IN Connection Unit 3 MP3 player, etc... Installation To the audio output jacks of your component (TV, VCR, etc.) Red White NOTE If your TV has only one output for audio (mono), connect it to the left (white) audio jack on the unit.
Installation USB Connection Connect the USB port of USB Memory (or MP3 player, etc.) to the USB port on the front of the unit. 23 Compatible USB Devices • MP3 Player : Flash type MP3 player. • USB Flash Drive : Devices that support USB2.0 or USB1.1. • The USB function of this unit does not support some USB devices. USB Connection USB device requirement Devices which require additional program installation connected to a computer, are not supported.
Installation OPTICAL In connection Antenna Connection Connect an optical output of Unit (or Digital Device etc) to the OPTICAL IN connector. OPTICAL IN Connection Connect the supplied FM antenna for listening to the radio. Connect the FM Wire antenna to the FM antenna connector. Antenna Connection 3 Installation To the digital optical output jack of your component Home theater speaker ez setup Listen to sound from TV, DVD and Digital Device with 5.1(2.1 or 2)ch mode.
Installation By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 25 to 29. OSD Initial language settings During the first use of this unit, the initial language setup menu appears on your TV screen. You must complete initial language selection before using the unit. English will be selected as the initial language. 1.
Installation Language Menu Language Select a language for the Setup menu and then on screen display. Disc Audio / Disc Subtitle / Disc Menu Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. 3 [Original] Refers to the original language in which the disc was recorded. Installation [Other] To select another language, press numeric buttons and then ENTER to enter the corresponding 4-digit number according to the language code list on the page 45.
Installation 2.1 Speaker Setup Make the following settings for the built-in 2.1 channel surround decoder. 1. Select [2.1 Speaker Setup] on the [Audio] menu. 2. Press ENTER. The [2.1 Speaker setup] appears. [Speaker selection] Select a speaker that you want to adjust. NOTE Certain speaker settings are prohibited by the Dolby Digital licensing agreement. [Size] Since the speaker settings are fixed, you cannot change the settings. [Volume] Press I i to adjust the output level of the selected speaker.
Installation DRC (Dynamic Range Control) Make the sound clear when the volume is turned down (Dolby Digital only). Set to [On] for this effect. Vocal Select [On] to mix karaoke channels into normal stereo. This function is effective for multi-channel karaoke DVDs only. HD AV Sync 3 Installation Sometimes Digital TV encounters a delay between picture and sound.
Installation You can enter or change password. 1. Select [Password] on the [Lock] menu and then press i. 2. Press ENTER. 3. Input a password and press ENTER. To change the password, press ENTER when the [Change] option is highlighted. Input a password and press ENTER. Enter it again and press ENTER to verify. 4. Press HOME to exit the menu. NOTE If you forget your password, you can clear it using the following steps: 1. Select the [Setup] menu on the [Home] menu.
Operation 4 Operation Using the Home Menu Basic Operations 1. Press HOME. Displays the [Home] menu. 1. Insert the disc by using the Z OPEN/ CLOSE or Connect the USB device to the USB port. 2. Press HOME. Displays the [Home] Menu. 4 Operation 2. Select an option by using I i. 3. Press ENTER then selected option menu. [Music] – Displays [MUSIC] menu. 3. Select an option by using I i. If you select the [Movie], [Photo] or [Music] option when you connect up to two devices, it appears as belows.
Operation To Press x (STOP) Playback Press B (PLAY), MONO/ STEREO. Pause Press X (PAUSE/STEP). Frameby-Frame playback Press X (PAUSE/STEP) repeatedly to play title Frame-by-Frame. (DVD, DivX only) During playback, press ./> SKIP to go to Skipping to the next chapter/ track/ the next/ file or to return to the previous beginning of the current chapter/ track/ chapter/ track/ file. file Press . SKIP twice briefly to step back to the previous chapter/ track/ file.
Operation To display the DVD Menu DVD When you play a DVD which contains several menu, you can select the menu you want using the Menu. 1. Press DISC MENU. The disc’s menu appears. DVD When you play a DVD which contains several title, you can select the title you want using the Menu. 1. Press TITLE. The disc’s title appears. Operation 2. Select the menu by pressing U u I i. 3. Press B (PLAY), MONO/STEREO to confirm. 1.5 times speed playback 3.
Operation ACD MP3 NOTE WMA The mark function enables you to store your favourite files from any disc or USB device in the unit memory. 1. Select [Music] on the [Home] menu. Music menu Returning to the upper folder. (MP3/ WMA only) File information will be displayed according to the ID3TAG information on the appropriate music file. (MP3 only) If you want to select all files on the list, select [Select All] and press ENTER. To delete a Marker 1.
Operation Viewing a PHOTO file JPG About help menu in the full screen. This unit can play discs with photo files. Menu 1. Select [Photo] on the [Home] menu and press ENTER. Menu Photo menu Moving to the previous or next file list. Buttons INFO./ DISPLAY Operation Displaying the Option menu. b/B Prev./ Next I/i Moving to another file O Close O RETURN Returning to the [Photo] menu. Options while viewing a photo You can use various options during viewing a photo in full screen. 4 1.
Operation Sleep Timer Setting System Select - Optional Press SLEEP one or more times to select delay time between 10 and 180 minutes, after the unit will turn off. You must select the appropriate system mode for your TV system. Press and hold X (PAUSE/ STEP) for more than five seconds to be able to select a system in the [Home] menu. (PAL/ NTSC) To check the remaining time, press SLEEP.
Operation Radio Operations Presetting the Radio Stations You can preset 50 stations for FM. Be sure that both FM aerials are connected. (Refer to the page 24) Listening to the radio 1. Press t RADIO&INPUT until FM appears in the display window. The last received station is tuned in. 4 Before tuning, make sure that you have turned down the volume. 1. Press t RADIO&INPUT until FM appears in the display window. 2. Select the desired frequency by using TUNING (-/+) 3.
Operation 37 Seeing information about a radio station The FM tuner is supplied with the RDS (Radio Data System) facility. This shows information about the radio station being listened to. Press RDS repeatedly to cycle through the various data types. : PS (Programme Service Name) The name of the channel will appear in the display PTY (Programme Type Recognition) The programme type (e.g. Jazz or News) will appear in the display.
Operation Sound adjustment Setting the surround mode On Display Description CLRVOICE This program make voice sound clear, improving the quality of voice sound. (We encourage to use this EQ when you watch the movie of 5.1 channel.) GAME You can enjoy more virtual sound while playing video games. NIGHT This may be useful when you want to watch movies at low volume late at night. RETOUCH When listening to MP3 files or other compressed music, you can enhance the sound.
Operation Recording to USB You can record music or sound souce to USB device by connecting in to the port on the unit. 1. Connect the USB device to the unit. 2. Select a mode in which you want to record. Play back a sound source first. 3. Start the recording by pressing z REC. 4. To stop recording, press x (STOP). [All tracks/ files recording] Record to USB in stop or play mode. [Program list recording] After marking desired file(s) and you can record it to USB (Refer to the page 33).
Operation Playing the iPod • Connect the iPod firmly. To open the iPod Dock, pull iPod dock. Connect the iPod You can enjoy the media files with your iPod. For details about iPod, refer to the iPod’s User Guide. Preparation • To view iPod’s Videos and Photos on the TV screen. - Be sure to use the video connection through the VIDEO OUT jack on the rear panel of this unit. Select the appropriate video input mode on the TV.
Operation Enjoying iPod on the screen Enjoying the iPod IN mode You can operate your iPod by controlling menu on the screen. You can operate your iPod by using the supplied remote control and controls on your iPod. 2. Press HOME. 3. Select [Music] or [Movie] using I/i, and press ENTER. If you connected the other device (CD or USB), select the iPod on the menu and ENTER. If you select the [Music] option when you connect iPod, the unit plays a music automatically. 4.
Operation NOTE • You cannot use the microphone on the iPod mode. • An error message “CHECK IPOD” or “Connected iPod model is not supported.” appears when: - your iPod is not available for the function to be operated. • An error message “CHECK IPOD” or “Please update iPod’s software.” appears when: - your iPod has an old software version. t Update your iPod software to latest version. • If this unit displays an error message, follow the 4 Operation message.
Maintenance 43 5 Maintenance Notes on Discs Handling the Unit Handling Discs When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean • Do not use volatile liquids such as insecticide spray near the unit. • Wiping with strong pressure may damage the surface.
Troubleshooting 6 Troubleshooting PROBLEM CAUSE CORRECTION Plug the power cord into the wall outlet No power The power cord is disconnected. securely. Select the appropriate video input mode The TV is not set to receive the DVD signal. on the TV so the picture from the unit appears on the TV screen. No picture The video cables are not connected Connect the video cables securely to both securely. the TV and unit.
Appendix 45 7 Appendix Language Codes Language Code Language Code Language Code Language Code Afar Afrikaans Albanian Ameharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali; Bangla Bhutani Bihari Breton Bulgarian Burmese Byelorussian Chinese Croatian Czech Danish Dutch English Esperanto Estonian Faroese Fiji Finnish 6565 6570 8381 6577 6582 7289 6583 6588 6590 6665 6985 6678 6890 6672 6682 6671 7789 6669 9072 7282 6783 6865 7876 6978 6979 6984 7079 7074 7073 French Frisian
Appendix Area Codes Choose a area code from this list.
Appendix Trademarks and Licenses 47 Energy Saving ( Extremely Low Power Consumption) On the LG products, an innovative power consumption system in stand-by mode is built. Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Surround are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved.
Appendix Specifications What is SIMPLINK? Some functions of this unit are controlled by TV’s remote control when this unit and LG TV with SIMPLINK are connected through HDMI connection. Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop, Power Off, etc. • Refer to the TV owner’s manual for the details of SIMPLINK function. • LG TV with SIMPLINK function has the logo as shown above. • Use a higher version cable than 1.2 A HDMI cable.
Appendix Amplifier Speakers • Stereo mode: 180 W + 180 W (4 Ω at 1 KHz) • Subwoofer 49 200 W (3 Ω at 60 Hz) • Front speaker Type: Impedance : Rated Input Power: Max. Input power: Net Dimensions (W x H x D): Net Weight: • Passive Subwoofer Type: Impedance: Rated Input Power: Max. Input power: Net Dimensions (W x H x D): Net Weight: 2 Way 3 speaker 4Ω 180 W 360 W 250 X 757 X 165 mm 2.5 kg 1 Way 1 speaker 3Ω 200 W 400 W 236 X 435 X 391 mm 4.
HT965DF-DH_BDEULL_ENG_4226.
